MultiBoardAssembly_Dlg-MBASystemPreferencesForm_GeneralMulti-board Assembly - General_AD

Created: August 24, 2017 | Updated: November 24, 2017
Now reading version 1.0. For the latest, read: Multi-board Assembly - General for version 1.1
This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer (with Altium Designer Enterprise Subscription) and a connected Altium 365 Workspace. Check out the FAQs page for more information.
All Contents

Parent page: Multi-board Assembly Preferences

The Multi-board Assembly - General page of the Preferences dialogThe Multi-board Assembly - General page of the Preferences dialog


The Multi-board Assembly - General page of the Preferences dialog is used to configure which objects to import from the PCB when buidling a multi-board.


The page is accessed by clicking General under the Multi-board Assembly folder in the main Preferences dialog (accessed by clicking the  button in the top right corner of the workspace).


PCB Import

  • Import Copper - check the box to import copper, including routing and polygons.
  • Import Overlay Layers - check the box to import overlay layers.
  • Import Polygons - check the box to import polygons. This option is ignored when the Import Copper option is not enabled.
  • Import Free 3D Bodies - check the box to import free 3D Bodies. 3D Bodies that are part of a component footprint are not affected by this option.
  • Do Not Import Component With Height Less Than - enable to import components with height less than the mils you enter in the textbox.
Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

Contact Us

Contact our corporate or local offices directly.

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
You are reporting an issue with the following selected text
and/or image within the active document: