Choose Component

Now reading version 1.0. For the latest, read: Choose Component for version 5
Applies to NEXUS Client versions: 1.0, 1.1, 2.0, 2.1, 3.0, 3.1, 3.2, 4 and 5

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

The Choose Component dialogThe Choose Component dialog

Summary

The Choose Component dialog allows you to move a specific component in the workspace, either by having the cursor jump to that component or by having the component moved to the current cursor position. This can be very beneficial in a dense design where visually looking for a particular component can prove very time consuming.

Access

The dialog is accessed from the PCB Editor when using the Edit » Move » Component command from the main menus. The cursor will change to a crosshair; click anywhere in the workspace away from design objects.

Options/Controls

  • Component Filter - this field, at the top of the dialog, allows you to enter a string-based search filter to quickly target the component required. This is particularly useful if there are many components in the design. As you type, the list of components below is filtered to only show matching component strings. You can use the wildcard characters; ? (any single character) and * (any character).
Clear the field or enter the * wildcard to list all components for the board.
  • Component List - this area lists all components for the board (or all components passing the current filter) by designator. Select the entry of the component you want to move.
  • Movement - choose one of the following options to determine how the selected component in the list is to be moved:
    • Jump to component - with this option enabled, after clicking OK the cursor will jump to the component in the workspace. The component will be attached, floating on the cursor, ready to be repositioned as required.
    • Move component to cursor - with this option enabled, after clicking OK the chosen component will be moved to the current cursor position within the main design window. The component will be attached, floating on the cursor, ready to be repositioned as required.
With this option, using the mouse to interact with the dialog results in the chosen component always jumping to wherever the OK button is clicked. In this case, it may prove more useful to use the arrow and Tab keys to navigate the dialog's controls and choose the required component, leaving the cursor at the required location within the workspace.