Altium NEXUS Documentation

RunManualPartSwapper

Modified by Jason Howie on Sep 28, 2017

Parent page: PinSwapper Commands

The following pre-packaged resource, derived from this base command, is available:


Applied Parameters: None

Summary

This command is used to interactively perform part-swapping (between sub-parts of a component) within the design workspace. A part is swappable with another part when both parts belong to the same Part Group. It is common for a component to consist of multiple functionally equivalent subparts. Part swapping allows the nets of such equivalent sub-parts to be swapped.

For a high-level overview of swapping functionality in Altium NEXUS, see Pin, Pair and Part Swapping.

Access

This command is accessed from the PCB Editor by choosing the Tools » Pin/Part Swapping » Interactive Part Swapping command from the main menus.

Use

After launching the command, everything in the PCB workspace is masked (faded), except those parts that are swappable. Keep an eye on the Status Bar, it will prompt you for the next action, to choose the first sub-part to swap. After clicking on any pin in the swappable sub-part, you will be prompted to choose a different sub-part from ABC, where ABC is the designator of the component you are swapping parts in. Click on a pin in the target sub-part to complete the swap action.

Pins will be swapped between the source and target sub-parts in accordance with the defined Part Sequence settings, if no part sequence is defined they will be allocated in a random fashion.

Tips

  1. Part swapping for a component is configured with the part group and sequence ID attributes. The part group indicates which sub-parts are able to be swapped with one another. The sequence ID attribute determines equivalence of the pins between swappable sub-parts. These are both text attributes and are accessible in the Part tab of the Configure Pin Swapping dialog.
  2. Part swap information will also appear in the Messages panel.
  3. Design changes that are a result of you performing a sub-part swap in the PCB editor are propagated back to the schematic using the standard Design Update process (run the Design » Update Schematics command from the PCB Editor).

 

Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

Contact Us

Contact our corporate or local offices directly.

You are reporting an issue with the following selected text
and/or image within the active document:
ALTIUM DESIGNER FREE TRIAL
Altium Designer Free Trial
Let’s get started. First off, are you or your organization already using Altium Designer?

If would like to speak with a representative, please contact your local Altium office.
Copyright © 2019 Altium Limited

In that case, why do you need an evaluation license?

If would like to speak with a representative, please contact your local Altium office.
Copyright © 2019 Altium Limited

Got it. You actually don’t need an evaluation license for that.

Click the button below to download the latest Altium Designer installer.

Download Altium Designer Installer

If would like to speak with a representative, please contact your local Altium office.
Copyright © 2019 Altium Limited

Please fill out the form below to get a quote for a new seat of Altium Designer.

By clicking “Get Your Free Trial”, you are agreeing to our Privacy Policy.
You may receive communications from Altium and can change your notification preferences at any time.

If you are on Altium Subscription, you don’t need an evaluation license.

If you are not an active Altium Subscription member, please fill out the form below to get your free trial.

By clicking “Get Your Free Trial”, you are agreeing to our Privacy Policy.
You may receive communications from Altium and can change your notification preferences at any time.

Why are you looking to evaluate Altium Designer?

If would like to speak with a representative, please contact your local Altium office.
Copyright © 2019 Altium Limited

You came to the right place! Please fill out the form below to get your free trial started.

By clicking “Get Your Free Trial”, you are agreeing to our Privacy Policy.
You may receive communications from Altium and can change your notification preferences at any time.

Great News!

Valid students can get their very own 6-month Altium Designer Student License for FREE! Just fill out the form below to request your Student License today.

By clicking “Get Your Free Trial”, you are agreeing to our Privacy Policy.
You may receive communications from Altium and can change your notification preferences at any time.

Got it. You can download a free Altium Designer Viewer license which is valid for a 6 months.

Please fill out the form below to request one.

By clicking “Get Your Free Trial”, you are agreeing to our Privacy Policy.
You may receive communications from Altium and can change your notification preferences at any time.

That’s great! Making things is awesome. We have the perfect program for you.

Upverter is a free community-driven platform designed specifically to meet the needs of makers like you.

Click here to give it a try!

If would like to speak with a representative, please contact your local Altium office.
Copyright © 2019 Altium Limited

Got it. You can download a free Altium Designer Viewer license which is valid for a 6 months.

Please fill out the form below to request one.

By clicking “Get Your Free Trial”, you are agreeing to our Privacy Policy.
You may receive communications from Altium and can change your notification preferences at any time.