StrToNumberDef

Now reading version 3.1. For the latest, read: StrToNumberDef for version 4

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

Parent page: PCB Query Functions - Parameters

Summary

Converts the nominated Parameter Value string to a number, or a default number, using the stipulated unit type.

Syntax

StrToNumber(Value : String , Unit : String , Default : Number) : Number

Example Usage

StrToNumberDef(ParameterValue('VoltageRating'),V,10)  >  50
Converts the Value string returned by the VoltageRating Parameter to a number, using Voltage (V) as the unit, then returns all objects with a Value greater than 50V. If the Parameter string or unit is unrecognized (can't be converted), a default value of 10 is returned.

StrToNumberDef(ParameterValue('VoltageRating'),'V',6) Between 10 And 50
Converts the Value string returned by the VoltageRating Parameter to a number, using Voltage (V) as the unit, then returns all objects with a Value rating between 10V and 50V. If the value cannot be read, a voltage of 6V (the defined default value) is assumed.

TIPS

The unit-aware string-to-number converter function accepts a large range of Unit type definitions, including:

  • V – Voltage
  • A – Current
  • Ohm – Resistance
  • Z – Impedance
  • F – Capacitance
  • H – Inductance
  • G – Conductance
  • W – Power
  • Hz – Frequency
  • Q – Charge
  • C – Temperature
  • dB – Decibels
  • % – Percent
  • m – Length
  • Kg – Mass
  • s – Time

The converter accepts standard value scaling factors (micro, kilo, mega etc) and therefore Parameter strings containing prefix abbreviations such as mV, uA, kHz etc.

Several value constructs are also supported. For example, the same resistance value can be represented as:

  • 2k2
  • 2.2k
  • 2200
  • 2,200
If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.