IeeeSymbol

Now reading version 2.1. For the latest, read: IeeeSymbol for version 4
Applies to NEXUS Client versions: 1.0, 1.1, 2.0, 2.1, 3.0, 3.1 and 3.2

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

Parent page: Schematic Query Functions - Fields

Summary

Returns all IEEE Symbol objects whose Symbol property complies with the Query.

Syntax

IeeeSymbol = IeeeSymbol_String
IeeeSymbol <> IeeeSymbol_String

IeeeSymbol_String must be one of the following strings:

  • 'Active Low Input'
  • 'Active Low Output'
  • 'Analog Signal In'
  • 'And'
  • 'Bidirectional Signal Flow'
  • 'Clock'
  • 'Delay'
  • 'Digital Signal In'
  • 'Dot'
  • 'GreaterThan/Equal'
  • 'Group Bin'
  • 'Group Line'
  • 'High Current'
  • 'Hiz'
  • 'Input/Output'
  • 'Invertor'
  • 'Left Right Signal Flow'
  • 'Less Than/Equal'
  • 'No Symbol'
  • 'Not Logic Connection'
  • 'Open Collector'
  • 'Open Collector Pull Up'
  • 'Open Emitter'
  • 'Open Emitter Pull Up'
  • 'Open Output'
  • 'Or'
  • 'PiSymbol'
  • 'Postponed Output'
  • 'Pulse'
  • 'Right Left Signal Flow'
  • 'Schmitt'
  • 'Shift Left'
  • 'Shift Right'
  • 'Sigma'
  • 'Xor'

Example Usage

IeeeSymbol = 'Left'
Returns all IEEE Symbol objects whose Symbol property is Left.

IeeeSymbol <> 'Center'
Returns all objects except IEEE Symbol objects whose Symbol property is Center.

IsSymbol && IeeeSymbol <> 'Open Output'
Returns all IEEE Symbol objects except those whose Symbol property is Open Output.

Tips

  1. The single quote characters (') at the start and end of IeeeSymbol_String are mandatory.
  2. The Symbol property is only defined for IEEE Symbol objects.