Violations Associated with Harnesses

Now reading version 2.0. For the latest, read: Violations Associated with Harnesses for version 5
Applies to NEXUS Client versions: 4 and 5

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

Parent page: Verifying Your Design Project

The Violations Associated with Harnesses region on the Error Reporting tab of the Project Options dialog
The Violations Associated with Harnesses region on the Error Reporting tab of the Project Options dialog

Logical, electrical, and drafting awareness in your schematic diagram can be verified during design project verification according to rules defined as part of the options for the design project – on the Error Reporting and Connection Matrix tabs of the Project Options dialog.

For a detailed overview of verifying your captured design, see Verifying Your Design Project.

The Violations Associated with Harnesses region on the Error Reporting tab of the Project Options dialog allows specifying the severity level associated with check of harness-related violations that can exist in source documents when validating a project. Use the following collapsible sections to access information on each violation available in this region.

For more information on signal harnesses, see Working with Signal Harnesses.