Setting Up a Requirements Project

In order to make establishing a requirements project easier and make the required features and functionalities available as the project evolves, the concept of Simple Start is supported in Requirements Portal.

When a newly created requirements project is accessed, it has only the Requirements Module enabled, which it reflected in the left-hand side project tree by displaying only the Requirements structure entry that includes project specifications, folders, sections, and subsections (for a new project, only one requirement named after the project presents by default).

As the project evolves and you need access to functionality of other modules, you can manage availability of the Verification & Validation and Blocks modules for the project from the Project Setup window accessed by clicking the  button in the Project Setup region at the bottom of the project tree.

Use the option on the Verification Planning tab of the window to enable/disable the Verification & Validation module and the option on the Design Connection tab to enable/disable the Blocks module. When a module is enabled, the corresponding entry is shown in the project tree, and the module's functionality is available for the project.

 

Alternatively, click the  control in the Project Setup region to expand it and use Verification Planning and Design Connection buttons to open corresponding tabs of the Project Setup window.

When both Verification & Validation and Blocks modules are enabled, the Project Setup region at the bottom of the project tree is shown in minimized state (). Click it to access the Project Setup window.

You can manage availability of modules for the project at any time. Enabling or disabling a module does not affect the project data. 

Si vous trouvez un problème, sélectionnez le texte/l’image et appuyez surCtrl + Enterpour nous envoyer vos commentaires.
Contents
Disponibilité des fonctionnalités

Les fonctionnalités auxquelles vous avez accès dépendent de la solution Altium dont vous disposez – Altium Develop, Altium Agile Teams, Altium Agile Enterprise, ou Altium Designer (avec un abonnement actif).

Si vous ne voyez pas une fonctionnalité documentée dans votre logiciel actuel, contactez le service commercial d’Altium pour en savoir plus.