PCB_Cmd-ShowComponentInServerShowComponentInServer_AD#show_component_in_server

Created: Maj 24, 2021 | Updated: Marzec 06, 2024 | Applies to version: 4

Now reading version 4. For the latest, read: PCB_Cmd-ShowComponentInServer((ShowComponentInServer))_AD#show_component_in_server for version 5

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

Parent page: PCB Commands

The following pre-packaged resources, derived from this base command, are available:

Show Component in Server

Applied Parameters: None

Summary

This command is used to browse to the Component Item-Revision for placed managed component.

Access

This command is accessed from the PCB Editor by right-clicking over a placed managed component and choosing the Component Actions » Show <Component> in <Server> command from the context menu.

This command is only available provided the component under the cursor is a managed component, that is, it has been placed from a managed content server.

Use

First, ensure that the cursor is positioned over the required managed component in the main design space.

After launching the command, the Explorer panel will appear, with the specific revision of the corresponding Component Item selected/presented.

Tip

The Component Item-Revision can also be browsed directly from the Properties panel, when presenting the properties for the selected component. In the Properties section of the panel (on the General tab) simply click the button to the right of the Design Item ID field.

Wersja do wydruku

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.

PCB_Cmd-ShowComponentInServerShowComponentInServer_AD#show_component_in_server

Summary

Access

Use

Tip

Was this page helpful?