TextEdit_Cmd-PastePaste_AD

Created: Czerwiec 05, 2017 | Updated: Marzec 06, 2024 | Applies to versions: 1.0, 1.1, 2.0, 2.1, 3.0, 3.1, 3.2, 4 and 5

Now reading version 3.1. For the latest, read: TextEdit_Cmd-Paste((Paste))_AD for version 5

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

Parent page: TextEdit Commands

The following pre-packaged resource, derived from this base command, is available:

Paste

Applied Parameters: None

Summary

This command is used to place the current contents of the standard Windows clipboard into any open Altium NEXUS text-based document.

Access

Access to this command can be made in the following ways:

Choose Edit » Paste from the main menus.
Click the button on the Text Standard toolbar.
Use the Ctrl+V keyboard shortcut.
Right-click and choose Paste from the context menu.

Use

Position the text cursor at the position within the document that you wish to paste and then launch the command. The contents of the clipboard will be pasted at this position.

Use the command repeatedly to paste multiple copies of the clipboard contents.

Wersja do wydruku

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.

TextEdit_Cmd-PastePaste_AD

Summary

Access

Use

Was this page helpful?