WorkspaceManager_Cmd-SendToVaultAsTemplateSendToVaultAsTemplate_AD

Created: Kwiecień 17, 2018 | Updated: Marzec 06, 2024 | Applies to versions: 1.0, 1.1, 2.0 and 2.1

Now reading version 1.0. For the latest, read: WorkspaceManager_Cmd-SendToVaultAsTemplate((SendToVaultAsTemplate))_AD for version 5

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

Parent page: WorkspaceManager Commands

The following pre-packaged resource, derived from this base command, is available:

Send Active Project to Server as Template

Applied Parameters: None

Summary

This command is used to send the active project as a template to a server.

Access

With the desired project active, this command can be accessed by clicking Project » Send to server as template from the main menus.

Use

Ensure that the project you want to send to the server is the active project.

After launching the command, a trimmed down version of the Explorer panel (titled Select or create project item for release) will open in which you can select the desired template to be sent to the server.

Tips

Before launching the command, ensure that the project you want to send to the server is the active project.

Wersja do wydruku

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.

WorkspaceManager_Cmd-SendToVaultAsTemplateSendToVaultAsTemplate_AD

Summary

Access

Use

Tips

Was this page helpful?