Search In: Doc:Documentation: NEXUS Client
Altium DesignerAltium 365Altium MCAD CoDesignerAltium CircuitMakerCompany DashboardAltium On-Prem Enterprise ServerAltium Infrastructure Server
Ver: Version: 2.1
543.23.13.02.12.01.11.0
Close
Поиск Search on Documentation

PCB_Dlg-ChooseNetClassDlgChoose Net Class_AD

Created: февраля 21, 2018 | Updated: марта 08, 2024 | Applies to versions: 1.0, 1.1, 2.0, 2.1, 3.0, 3.1, 3.2, 4 and 5
Вы просматриваете версию 2.1. Для самой новой информации, перейдите на страницу PCB_Dlg-ChooseNetClassDlg((Choose Net Class))_AD для версии 5

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.


The Choose Net Class dialog

Summary

The Choose Net Class dialog is used to choose a net class for selected components.

Access

The dialog is accessed in the PCB editor with more than one component selected by right-clicking then selecting Net Actions » Add Selected Nets to NetClass from the context menu.

Options/Controls

  • Net Classes - all existing classes are listed in the table. Choose a target net class for the selected components.