Working with a Fill Keepout Object on a PCB in Altium NEXUS

Вы просматриваете версию 3.1. Для самой новой информации, перейдите на страницу Working with a Fill Keepout Object on a PCB in Altium NEXUS для версии 4

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

Parent page: PCB Objects

A Fill Keepout
A Fill Keepout

Summary

A fill is a primitive design object that can be placed on any layer. As well as the standard fill that is used for design tasks such as defining a component outline, there is a second type of fill available that is referred to as a fill keepout. A fill keepout can be placed as a layer-specific keepout object or an all-layer keepout to act, for example, as a placement or routing barrier. The difference between a standard fill and a keepout fill is that layer-specific keepout-type fills are not included in output generation, such as Gerber or ODB++. A keepout fill is identified by having an outline in the Keepout color.

Availability

Fill Keepouts are available for placement in both PCB and PCB Library Editors in the following ways:

  • In the PCB Editor, place a keepout fill in the following ways:
    • Click Place » Keepout » Fill from the main menus.
    • Click the  button in the graphic objects drop-down on the Active Bar menu located at the top of the design space. (Click and hold an Active Bar button to access other related commands. Once a command has been used, it will become the top-most item on that section of the Active Bar.)

  • Right-click then choose Place » Keepout » Fill from the context menu.
  • In the PCB Library Editor, place a keepout fill in the following ways:
    • Click Place » Keepout » Fill from the main menus.
    • Click the  button in the graphic objects drop-down on the Active Bar menu located at the top of the design space. (Click and hold an Active Bar button to access other related commands. Once a command has been used, it will become the top-most item on that section of the Active Bar.)

A keepout fill can only be placed on a signal layer or the Keepout layer.

Placement

After launching the command, the cursor will change to a cross-hair and you will enter fill keepout placement mode. Placement is made by performing the following sequence of actions:

  1. Click or press Enter to anchor the first corner of the fill keepout.
  2. Move the cursor to adjust the size of the fill keepout then click or press Enter to anchor the diagonally-opposite corner and complete placement of the fill keepout.
  3. Continue placing further fill keepouts or right-click or press Esc to exit placement mode.

Additional actions that can be performed during placement while the fill keepout is still floating on the cursor and before the first corner of the fill keepout is anchored are:

  • Press the Tab key to pause the placement and access the Keepout - Fill mode of the Properties panel from where its properties can be changed on the fly. Click the design space pause button overlay ( ) to resume placement.
  • Press the Alt key to constrain the direction of movement to the horizontal or vertical axis depending on the initial direction of movement. 
While attributes can be modified during placement (Tab to access the Properties panel), keep in mind that these will become the default settings for further placement unless the Permanent option on the PCB Editor – Defaults page of the Preferences dialog is enabled. When this option is enabled, changes made will affect only the object being placed and subsequent objects placed during the same placement session.

Graphical Editing

This method of editing allows you to select a placed object directly in the design space and graphically change its size, shape or location.

When a fill keepout object is selected, the following editing handles are available:

A selected Fill Keepout
A selected Fill Keepout

  • Click, hold and drag the corner handles to resize the fill keepout in the vertical and horizontal directions simultaneously.
  • Click, hold and drag the side, top and bottom handles to resize the fill keepout in the vertical and horizontal directions separately.
  • Click, hold and drag the middle handle to rotate the fill keepout about its center point.
  • Click anywhere on the fill keepout away from editing handles then hold and drag to reposition it. While dragging, the fill keepout can be rotated or mirrored:
    • Press the Spacebar to rotate the fill keepout counterclockwise or Shift+Spacebar for clockwise rotation. Rotation is in accordance with the value for the Rotation Step defined on the PCB Editor – General page of the Preferences dialog.
    • Press the X or Y keys to mirror the fill keepout along the X-axis or Y-axis.
If attempting to graphically modify an object that has its Locked property enabled, a dialog will appear asking for confirmation to proceed with the edit. If the Protect Locked Objects option is enabled on the PCB Editor – General page of the Preferences dialog, and the Locked option for that design object is enabled as well, then that object cannot be selected or graphically edited. Click the locked object to select it then disable the Locked property in the List panel or disable the Protect Locked Objects option to graphically edit the object.

Non-Graphical Editing

The following methods of non-graphical editing are available:

Via the Keepout - Fill Dialog or Properties Panel

Properties page: Fill Keepout Properties

This method of editing uses the associated Keepout - Fill dialog and Properties panel to modify the properties of a Fill Keepout object. 

The Keepout - Fill dialog on the left, and the Keepout - Fill mode of the Properties panel, on the right.    The Keepout - Fill dialog on the left, and the Keepout - Fill mode of the Properties panel, on the right. 

During placement, the Keepout - Fill mode of the Properties panel can be accessed by pressing the Tab key. Once the Fill Keepout is placed, all options appear.

After placement, the Keepout - Fill dialog can be accessed by:

  • Double-clicking on the placed Fill Keepout object.
  • Placing the cursor over the Fill Keepout object, right-clicking then choosing Properties from the context menu.

After placement, the Keepout - Fill mode of the Properties panel can be accessed in one of the following ways:

  • If the Properties panel is already active, by selecting the Fill Keepout object.
  • After selecting the Fill Keepout object, select the Properties panel from the Panels button at the bottom right of the design space or select View » Panels » Properties from the main menu.
If the Double Click Runs Interactive Properties option is disabled (default) on the PCB Editor - General page of the Preferences dialog, when the primitive is double-clicked or you right-click on a selected primitive then choose Properties, the dialog will open. When the Double Click Runs Interactive Properties option is enabled, the Properties panel will open. 
While the options are the same in the dialog and the panel, the order and placement of the options may differ slightly. 
Press Ctrl+Q to toggle the units of measurement currently used in the panel between metric (mm) and imperial (mil). This only affects the display of measurements in the panel; it does not change the measurement unit specified for the board, which is configured in the Units setting in the Properties panel when there are no objects selected in the editing design space.

Editing Multiple Objects

The Properties panel supports multiple object editing, where the property settings that are identical in all currently selected objects may be modified. When multiples of the same object type are selected manually, via the Find Similar Objects dialog or through a Filter or List panel, a Properties panel field entry that is not shown as an asterisk (*) can be edited for all selected objects.

Editing via the List Panel

Panel pages: PCB List, PCB Filter, PCBLIB List, PCBLIB Filter

The List panel allows you to display design objects from one or more documents in tabular format, enabling quick inspection and modification of object attributes. Used in conjunction with appropriate filtering by using the applicable Filter panel, or the Find Similar Objects dialog, it enables the display of just those objects falling under the scope of the active filter – allowing you to target and edit multiple design objects with greater accuracy and efficiency.

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.
Content