Place Specific NoERC

Вы просматриваете версию 1.0. Для самой новой информации, перейдите на страницу Place Specific NoERC для версии 2.1

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

The Place Specific NoERC dialog.
The Place Specific NoERC dialog.

Summary

The Specific No ERC dialog allows the designer to suppress specific errors or warnings resulting from a Project Compile.  

Access

The Specific No ERC dialog can be accessed from the (Place » Directives » Place Specific No ERC) menu.  

Options/Controls

  • Compile Errors by Net - This column displays nets in the current project that have errors or warnings resulting from a compile.
  • Suppress - This column allows designers to select specific nets to be included by the No ERC.
  • Show selected net - Zoom to the schematic for the selected net in the Compile Errors by Net column.
  • Recompile Project - Click to compile all schematic pages in the project.
  • Automatically recompile - Enable to automatically recompile while placing directives, to ensure the list remains accurate.
  • Automatically show selected - Click to zoom to the corresponding schematic net selected from the Compile Errors by Net column.

 

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.