Configuring Schematic Bezier Object Properties in Altium NEXUS

Вы просматриваете версию 1.1. Для самой новой информации, перейдите на страницу Configuring Schematic Bezier Object Properties in Altium NEXUS для версии 4

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

Parent page: Bezier

Schematic Editor object properties are definable options that specify the visual style, content and behavior of the placed object. The property settings for each type of object are defined in two different ways:

  • Pre-placement settings – most Bezier object properties, or those that can logically be pre-defined, are available as editable default settings on the Schematic - Defaults page of the Preferences dialog (access from the  button at the top-right of the workspace). Select the object in the Primitive List to reveal its options on the right.
  • Post-placement settings – all Bezier object properties are available for editing in the Properties panel when a placed Bezier is selected in the workspace.

The Bezier default settings in the Preferences dialog and the Bezier mode of the Properties panel   The Bezier default settings in the Preferences dialog and the Bezier mode of the Properties panel

Properties

  • Curve Width - use the drop-down to select the desired curve width. Choices are Smallest, Small, Medium, and Large. Click the color box to set the desired color.
If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.