Other Installers

Последнее изменение: Jason Howie; 08.01.2020

This page presents a convenient listing of previously available Altium Design solutions, with links to installers, service packs, output generators, libraries, and the like.

Altium NEXUS (Publicly Available Client and Server)

Vault Technologies

  • Altium Vault 3.0.14 (178MB) - Installing the Altium Vault is performed using the Altium Vault Installer. Download and run Altium_Vault_3_0_14_730.exe. Specify the destination folders for the installation, and the data, and specify the port number for the web server. For more information, see Installation, Licensing & Management.
  • Altium Vault 2.0 (145MB) - Installing the Altium Vault is performed using the Altium Vault Installer. Download and Run Altium Vault 2.0.5.34308.exe. Specify the destination folders for the installation, and the data, and specify the port number for the web server. For more information, see Installing the Altium Vault.
  • Altium Vault Server 1.2 (137MB) - Installing the Altium Vault Server is performed using the Altium Vault Server Installer. Download and Run Altium Vault Server 1.2.30757.exe. Specify the destination folders for the installation, and the data, and specify the port number for the web server. For more information, see Altium Vault Server.
  • Personal Vault 1.2 (65.5MB) - Installing the Personal Vault is performed using the Personal Vault Installer. Download and Run Altium Personal Vault 1.2.30759.exe. Specify the destination folders for the installation and for the data. For more information, see Altium Personal Vault.
Personal Vault 1.2 introduced the ability to acquire managed content from other vaults. At the same time, the number of possible concurrent connections was reduced from 3 to a single connection. If more than a single (concurrent) connection is required, consider upgrading to Altium Vault 2.0 (or later), or retaining Personal Vault 1.1.
  • Team Configuration Center 1.0 (TC2) (99.7MB) - Installing the Team Configuration Center is performed using the TC2 Installer. Download and Run TC2 1.0.30758.exe. Where the installer detects an installed Altium Vault Server, TC2 will be set up to use it as its default repository. TC2 requires the installation of the latest Private License Server v14.0. For more information, see Centralized Environment Configuration Management. For detailed information regarding installation and licensing, see Installing & Licensing the Team Configuration Center.
  • Vault Migration Tool (1.9MB Zip)- To successfully migrate between vaults, you must be using the latest version of the Vault Migration Tool (version 1.3.0.7), Altium Personal Vault (build 1.2.30759), and Altium Vault (build 2.0.33788 or later). Ensure you have upgraded your Altium Personal Vault (if not already) from v1.1 to v1.2.

Altium Designer

To take advantage of the latest capabilities in Altium Designer, it is advised to upgrade to the latest version. Many great new features and technologies have been developed and added along the way since these previous versions of the software, as well as a myriad of enhancements to existing features, bug fixes and implementation of ideas sourced from members of the AltiumLive community. And when you do upgrade to the latest release of Altium Designer, it's highly recommended to purchase Altium Subscription for each license too. Being on subscription opens the door to a number of additional attractions, not least the ability to stay current with the software – being able to install new updates and access features and functionality as soon as they leave development. Read more about the value Altium Subscription brings here.

These updates can only be applied to a Summer 09 installation of Altium Designer. The following downloads include a setup program that is used to install the update.

Service Pack 1
Build 9.1.0.18363 (17654 to 18363) (153MB) exe or zip
Build 9.1.0.18363 (17654 to 18363) Libraries (8.58MB) exe or zip

Service Pack 2
Build 9.2.0.18802 (18363 to 18802) (40MB) exe or zip
Build 9.2.0.18802 (18363 to 18802) Libraries (43.6MB) exe or zip

Service Pack 3
Build 9.3.0.19150 (18802 to 19150) (193MB) exe or zip
Build 9.3.0.19150 (18802 to 19150) Libraries (3.1MB) exe or zip

Service Pack 3 Hotfix 1
Build 9.3.1.19182 (19150 to 19182) (459KB) exe or zip

Service Pack 4
Build 9.4.0.20159 (19182 to 20159) (80MB) exe or zip
Build 9.4.0.20159 (19182 to 20159) Libraries (1MB) exe or zip
Build 9.4.0.20159 (19150 to 20159) Libraries (1MB) exe or zip

Updates for local update server configuration files

The following downloads provide the latest web update software and the XML file for configuring a local update server. These updates correspond to the Self-contained updates in the section above and must be updated at the same time if you are using a local update server. Local update servers allow you to share updates on an internal server. End-user machines can be configured to connect to this server in order to check for and download the updates. For more information about this, please read the Altium Designer Summer 09 - Local Update Server Setup page.

Private License Server updates

Prior to installing license server updates, you must uninstall your existing Private License Server (or Floating License Server as it was previously known) by using Add and Remove Programs in the Windows Control Panel. We recommend you backup any important information in the Altium Designer installation directory prior to uninstalling.

These updates can only be applied to a Winter 09 installation of Altium Designer. The following downloads include a setup program that is used to install the update.

Service Pack 1
Build 8.1.0.16385 (15895 to 16385) (228MB) exe or zip
Build 8.1.0.16385 (15895 to 16385) Libraries (9MB) exe or zip

Service Pack 2
Build 8.2.0.16457 (16385 to 16457) (1.8MB) exe or zip

Service Pack 3
Build 8.3.0.16776 (16457 to 16776) (4.4MB) exe or zip

Updates for local update server configuration files

The following downloads provide the latest web update software and the XML file for configuring a local update server. These updates correspond to the Self-contained updates in the section above and must be updated at the same time if you are using a local update server. Local update servers allow you to share updates on an internal server. End-user machines can be configured to connect to this server in order to check for and download the updates. For more information about this, please read the Altium Designer Winter 09 - Local Update Server Setup page.

Floating License Server updates

Prior to installing license server updates, you must uninstall your existing Floating License Server by using Add and Remove Programs in the Windows Control Panel. We recommend you backup any important information in the Altium Designer installation directory prior to uninstalling.

These updates can only be applied to a Summer 08 installation of Altium Designer. The following downloads include a setup program that is used to install the update.

Service Pack 1
Build 7.1.0.14670 (13815 to 14670) (239MB) exe or zip
Build 7.1.0.14670 (13815 to 14670) Libraries (19MB) exe or zip

Updates for local update server configuration files

The following downloads provide the latest web update software and the XML file for configuring a local update server. These updates correspond to the Self-contained updates in the section above and must be updated at the same time if you are using a local update server. Local update servers allow you to share updates on an internal server. End-user machines can be configured to connect to this server in order to check for and download the updates. For more information about this, please read the Altium Designer Summer 08 - Local Update Server Setup page.

Floating License Server updates

For instructions on installing and activating the Floating License Server, refer to GU0103 License Service Setup Guide.

Prior to installing license server updates, you must uninstall your existing Floating License Server by using Add and Remove Programs in the Windows Control Panel. We recommend you backup any important information in the Altium Designer installation directory prior to uninstalling.

  • Altium Designer 6 full installation
  • Altium Designer 2004 full installation

The following Hot Fixes are available for Altium Designer 2004 SP2:

  • OUT_Gerber.zip (ZIP 733 KB)A software update for the Gerber Output. Extract the OUT_Gerber.dll file into the System folder of your Altium 2004 installation and replace the current file.
  • DxpPdfViewer.zip (ZIP 226 KB)Fixes the error message "Dxppdf viewer - Interface not supported" caused by Acrobat Reader 7. Extract the DxpPdfViewer.exe file into the System folder of your Altium 2004 installation and replace the current file.
  • SchRouter.zip (ZIP 911 KB)A software update for the autowirer tool. Extract the SchRouter.dll file into the System folder of your Altium 2004 installation and replace the current file. 

Libraries

The below library downloads are deemed to be 'frozen libraries'. The content of these ZIPs was built at the time of the launch of Altium Designer 10, and will not be updated.

Examples & Reference Designs

The below downloads are deemed to be 'frozen'. These ZIPs were built at the time of the launch of Altium Designer 10 and may not include the same set of examples and reference designs as what is now available in the Content Store

Output Generators

All Altium Designer releases from Summer 08 onwards include all available output generators. For prior versions, the generators available for download are listed in the following collapsible sections:

As well as the standard output generators (such as netlisters and BOMs) included with Altium Designer 6, additional outputers can be added at any time. This is a listing of additional outputers available for Altium Designer 6.

Installation
To install one or more of these outputers, download the ZIP file, extract the DLL and OUT file, and copy them to the Altium Designer 6 ../System folder. When you restart your Altium software they will automatically appear in the appropriate menu.

Download
These output generators have been updated for Altium Designer 6.9 version and are not compatible with previous versions. You can check your version via the Help » About menu.

Altium Designer 6.9 Output Generator Files

Netlisters

File size

Description

Cadnetix

(zip - 649KB)  

Cadnetix® Netlister for Altium Designer

Calay

(zip - 650KB)

Calay® Netlister for Altium Designer

EEsof (Libra and Touchstone)

(zip - 724KB)

EEsof® (Libra and Touchstone) Netlister for Altium Designer

Intergraph

(zip - 654KB)

Intergraph® Netlister for Altium Designer

Mentor Boardstation 6

(zip - 650KB)

Mentor® Boardstation 6 Netlister for Altium Designer

OrCAD (DOS)

(zip - 654KB)

OrCAD® (DOS) Netlister for Altium Designer

Pads ASCII

(zip - 655KB)

Pads® ASCII Netlister for Altium Designer

P-CAD (MasterDesigner)

(zip - 654KB)

P-CAD (MasterDesigner) Netlister for Altium Designer

P-CAD NLT

(zip - 654KB)

P-CAD NLT Netlister for Altium Designer

Protel 2

(zip - 655KB)

Protel 2 Netlister for Altium Designer

Racal Redac

(zip - 655KB)

Racal® Redac Netlister for Altium Designer

RINF

(zip - 649KB)

RINF Netlister for Altium Designer

SciCards

(zip - 649KB)

SciCards® Netlister for Altium Designer

Tango

(zip - 654KB)

Tango® Netlister for Altium Designer

Telesis

(zip - 649KB)

Telesis® Netlister for Altium Designer

Wirelist

(zip - 649KB)

Wirelist® Netlister for Altium Designer

As well as the standard output generators (such as netlisters and BOMs) included with Altium Designer 2004, additional outputers can be added at any time. This is a listing of additional outputers available for Altium Designer 2004.

Installation

To install one or more of these outputers, download the ZIP file, extract the DLL and OUT file, and copy them to the Altium2004 ..\System folder. When you restart your Altium software they will automatically appear in the appropriate menu.

Download

Select the version of these files that corresponds to your version of Altium Designer. You can check your version via the Help » About menu.

Altium Designer Service Pack 4 (Build number 8.4.03.3664) Output Generator Files

Netlisters

File size

Description

Cadnetix

(zip - 508KB)  

Cadnetix® Netlister for Altium Designer

Calay

(zip - 509KB)

Calay® Netlister for Altium Designer

EEsof (Libra and Touchstone)

(zip - 565KB)

EEsof® (Libra and Touchstone) Netlister for Altium Designer

Intergraph

(zip - 510KB)

Intergraph® Netlister for Altium Designer

Mentor Boardstation 6

(zip - 510KB)

Mentor® Boardstation 6 Netlister for Altium Designer

OrCAD (DOS)

(zip - 510KB)

OrCAD® (DOS) Netlister for Altium Designer

Pads ASCII

(zip - 511KB)

Pads® ASCII Netlister for Altium Designer

P-CAD (MasterDesigner)

(zip - 510KB)

P-CAD (MasterDesigner) Netlister for Altium Designer

P-CAD NLT

(zip - 510KB)

P-CAD NLT Netlister for Altium Designer

Protel 2

(zip - 511KB)

Protel 2 Netlister for Altium Designer

Racal Redac

(zip - 511KB)

Racal® Redac Netlister for Altium Designer

RINF

(zip - 510KB)

RINF Netlister for Altium Designer

SciCards

(zip - 509KB)

SciCards® Netlister for Altium Designer

Tango

(zip - 510KB)

Tango® Netlister for Altium Designer

Telesis

(zip - 508KB)

Telesis® Netlister for Altium Designer

Wirelist

(zip - 509KB)

Wirelist® Netlister for Altium Designer

 

Altium Designer Service Pack 3 (Build number 8.3.06.3413) Output Generator Files

Netlisters

File size

Description

Cadnetix

(zip - 502KB)  

Cadnetix® Netlister for Altium Designer

Calay

(zip - 502KB)

Calay® Netlister for Altium Designer

EEsof (Libra and Touchstone)

(zip - 560KB)

EEsof® (Libra and Touchstone) Netlister for Altium Designer

Intergraph

(zip - 504KB)

Intergraph® Netlister for Altium Designer

Mentor Boardstation 6

(zip - 503KB)

Mentor® Boardstation 6 Netlister for Altium Designer

OrCAD (DOS)

(zip - 505KB)

OrCAD® (DOS) Netlister for Altium Designer

Pads ASCII

(zip - 505KB)

Pads® ASCII Netlister for Altium Designer

P-CAD (MasterDesigner)

(zip - 504KB)

P-CAD (MasterDesigner) Netlister for Altium Designer

P-CAD NLT

(zip - 504KB)

P-CAD NLT Netlister for Altium Designer

Protel 2

(zip - 505KB)

Protel 2 Netlister for Altium Designer

Racal Redac

(zip - 505KB)

Racal® Redac Netlister for Altium Designer

RINF

(zip - 503KB)

RINF Netlister for Altium Designer

SciCards

(zip - 503KB)

SciCards® Netlister for Altium Designer

Tango

(zip - 504KB)

Tango® Netlister for Altium Designer

Telesis

(zip - 502KB)

Telesis® Netlister for Altium Designer

Wirelist

(zip - 503KB)

Wirelist® Netlister for Altium Designer

 

Altium Designer Service Pack 2  (Build number 8.2.12.2761) Output Generator Files

Netlisters

File size

Description

Cadnetix

(zip - 396KB)  

Cadnetix® Netlister for Altium Designer

Calay

(zip - 397KB)

Calay® Netlister for Altium Designer

EEsof (Libra and Touchstone)

(zip - 452KB)

EEsof® (Libra and Touchstone) Netlister for Altium Designer

Intergraph

(zip - 397KB)

Intergraph® Netlister for Altium Designer

Mentor Boardstation 6

(zip - 397KB)

Mentor® Boardstation 6 Netlister for Altium Designer

OrCAD (DOS)

(zip - 397KB)

OrCAD® (DOS) Netlister for Altium Designer

Pads ASCII

(zip - 398KB)

Pads® ASCII Netlister for Altium Designer

P-CAD (MasterDesigner)

(zip - 397KB)

P-CAD (MasterDesigner) Netlister for Altium Designer

P-CAD NLT

(zip - 397KB)

P-CAD NLT Netlister for Altium Designer

Protel 2

(zip - 398KB)

Protel 2 Netlister for Altium Designer

Racal Redac

(zip - 398KB)

Racal® Redac Netlister for Altium Designer

RINF

(zip - 399KB)

RINF Netlister for Altium Designer

SciCards

(zip - 397KB)

SciCards® Netlister for Altium Designer

Tango

(zip - 397KB)

Tango® Netlister for Altium Designer

Telesis

(zip - 396KB)

Telesis® Netlister for Altium Designer

Wirelist

(zip - 396KB)

Wirelist® Netlister for Altium Designer

Miscellaneous

  • Altium Designer Uninstaller (1.4MB) - Uninstalling Altium Designer is performed using the Altium Uninstaller. Select the installation you wish to uninstall, control the degree to which you want to uninstall , and manage and clear your download cache. This uninstaller can be used for Altium Designer 13, 12 and 10.
  • Altium Instrument Dashboard (31.7MB) - A stand-alone, custom instrument viewer that lets you remotely control and test designs using wireless or Internet technology, without having Altium Designer installed. A free application that can be installed on any PC.
  • Altium Designer Viewer (131MB) - Enhances the data exchange capabilities of Altium Designer by giving non-designers secure access to essential design data, plus the ability to generate reports and printouts. A free application that can be installed on any PC.
  • Private License Server (14.0.0.34) - Administer license usage on your local network. By setting up a Private License Server, your central server machine can control access to floating licenses by multiple computers on the network.

Altium DXP (2002 Release)

As well as the standard output generators (such as netlisters and BOMs) included with Altium DXP, additional outputters can be added at any time. This is a listing of additional outputers available for Altium DXP (2002 Release) with Service Pack 2. Not compatible with DXP 2004 / Altium Designer.

Installation

To install one or more of these outputters, download the ZIP file, extract the DLL and OUT file, and copy them to the AltiumSystem folder. When you restart Altium DXP they will automatically appear in the appropriate menu.

Netlisters

File size

Description

Version Req'd

Cadnetix

(zip - 449KB)  

Cadnetix® Netlister for Altium DXP

      SP2

Calay

(zip - 450KB)

Calay® Netlister for Altium DXP

      SP2

EEsof (Libra and Touchstone)

(zip - 486KB)

EEsof® (Libra and Touchstone) Netlister for Altium DXP

      SP2

Intergraph

(zip - 444KB)

Intergraph® Netlister for Altium DXP

      SP2

Mentor Boardstation 6

(zip - 444KB)

Mentor® Boardstation 6 Netlister for Altium DXP

      SP2

OrCAD (DOS)

(zip - 444KB)

OrCAD® (DOS) Netlister for Altium DXP

      SP2

Pads ASCII

(zip - 445KB)

Pads® ASCII Netlister for Altium DXP

      SP2

P-CAD (MasterDesigner)

(zip - 444KB)

P-CAD (MasterDesigner) Netlister for Altium DXP

      SP2

P-CAD NLT

(zip - 444KB)

P-CAD NLT Netlister for Altium DXP

      SP2

Protel 2

(zip - 445KB)

Protel 2 Netlister for Altium DXP

      SP2

Racal Redac

(zip - 445KB)

Racal® Redac Netlister for Altium DXP

      SP2

Scicards

(zip - 449KB)

Scicards® Netlister for Altium DXP

      SP2

Tango

(zip - 444KB)

Tango® Netlister for Altium DXP

      SP2

Telesis

(zip - 448KB)

Telesis® Netlister for Altium DXP

      SP2

Protel 99 SE

  • Protel 99 SE Service Pack 6  (EXE 12,077 KB) - Cumulative SP6 download for Protel 99 SE. Contains updates and enhancements in binary patch form to update your current installation. Compatible with both the licensed and trial versions of Protel 99 SE, you do not need to remove any previously released service packs.
  • Protel Service Pack 6 Packs - Various packages included in Service Pack 6 for Protel 99SE:
    • P-CAD Translation Pack (EXE 1,619 KB)Included in Service Pack 6 for Protel 99 SE - This pack provides seamless migration between Protel 99 SE and the P-CAD 2000 design environment. This translator supports ACCEL V15 ASCII and P-CAD 2000 ASCII files.View Readme
    • PADS Importer (EXE 1,420 KB) Included in Service Pack 6 for Protel 99 SE Allows you to import a variety of PADS® PCB ASCII files into Protel 99 SE's PCB Editor.View Readme
    • Hole Size Editor (EXE 193 KB) Version 5.0 - Included in Service Pack 6 for Protel 99 SE - Displays a list of all the hole sizes used on the PCB, allowing you to change any hole size, automatically updating all the affected pads and vias. Requires Protel 99 SE.
  • AutoRFQ (EXE 2.1 MB) - AutoRFQ is a web-based system that allows you to request a quotation for the fabrication or assembly of your board directly from Protel 99 SE's PCB editor.
  • Protel 99 SE Handbook (PDF 5.13 MB)

Protel 99

Protel 98

Note: This file is the same file that was released with Protel 98 Service Pack 1. Compatible with Protel 98 service packs 1, 2, and 3.

Protel Version 3

Protel Version 3 SP 1 (EXE 2,526 KB) - Contains updates and enhancements in binary patch form to update your current installation.

P-CAD

All Altium freeware products are provided subject to the conditions set out in the Altium Freeware End-user License Agreement.

Freeware Downloads

  • Autotrax (ZIP 821 KB) - DOS Freeware version 1.61 - Complete PCB layout package with output support for printers, pen plotters and Gerber. Download and run the file in the root directory of your hard drive to extract the install program. The install program must be run from the root directory.
Please Note: We do not provide technical support for this Autotrax Freeware version.
  • EasyTrax (ZIP 485 KB) - DOS Freeware version 2.06 - Complete PCB layout package with output support for printers, pen plotters and Gerber. System requirements: PC-compatible; DOS 2.0 or later; 640K RAM; 2Mb of hard disk space.
Please Note: We do not provide technical support for this EasyTrax Freeware version.

 

Обнаружили проблему в этом документе? Выделите область и нажмите Ctrl+Enter, чтобы оповестить нас.

Связаться с нами

Связаться с нашими Представительствами напрямую

Вы сообщаете о проблеме, связанной со следующим выделенным текстом
и/или изображением в активном документе:
Бесплатная пробная версия Altium Designer
Бесплатная пробная версия Altium Designer
Давайте приступим. Для начала, Вы или Ваше предприятие уже используете Altium Designer?

Если Вы хотите поговорить с представителем, пожалуйста, свяжитесь с местным офисом Altium.
Copyright © 2019 Altium Limited

В таком случае, для чего Вам необходима пробная лицензия?

Если Вы хотите поговорить с представителем, пожалуйста, свяжитесь с местным офисом Altium.
Copyright © 2019 Altium Limited

Вам для этого не нужна пробная лицензия.

Нажмите кнопку ниже, чтобы загрузить установщик самой новой версии Altium Designer

Загрузить установщик Altium Designer

Если Вы хотите поговорить с представителем, пожалуйста, свяжитесь с местным офисом Altium.
Copyright © 2019 Altium Limited

Пожалуйста, заполните форму ниже, чтобы получить ценовое предложение.

Нажимая [Получить бесплатнную пробную версию], Вы соглашаетесь с нашей Политикой конфиденциальности. Вам могут приходить сообщения от компании Altium, и Вы можете изменить настройки уведомлений в любой момент.

Если Ваша подписка Altium активна, у Вас нет необходимости в пробной лицензии.

Если у Вас нет активной подписки Altium, пожалуйста, заполните форму ниже, чтобы получить пробную версию.

Нажимая [Получить бесплатнную пробную версию], Вы соглашаетесь с нашей Политикой конфиденциальности. Вам могут приходить сообщения от компании Altium, и Вы можете изменить настройки уведомлений в любой момент.

Для чего Вы хотите попробовать Altium Designer?

Если Вы хотите поговорить с представителем, пожалуйста, свяжитесь с местным офисом Altium.
Copyright © 2019 Altium Limited

Вы нашли нужное место! Пожалуйста, заполните форму ниже, чтобы начать использование пробной версии.

Нажимая [Получить бесплатнную пробную версию], Вы соглашаетесь с нашей Политикой конфиденциальности. Вам могут приходить сообщения от компании Altium, и Вы можете изменить настройки уведомлений в любой момент.

Great News!

Valid students can get their very own 6-month Altium Designer Student License for FREE! Just fill out the form below to request your Student License today.

Нажимая [Получить бесплатнную пробную версию], Вы соглашаетесь с нашей Политикой конфиденциальности. Вам могут приходить сообщения от компании Altium, и Вы можете изменить настройки уведомлений в любой момент.

Вы можете загрузить бесплатную лицензию средства просмотра Altium Designer Viewer сроком действия 6 месяцев.

Пожалуйста, заполните форму ниже, чтобы запросить эту лицензию.

Нажимая [Получить бесплатнную пробную версию], Вы соглашаетесь с нашей Политикой конфиденциальности. Вам могут приходить сообщения от компании Altium, и Вы можете изменить настройки уведомлений в любой момент.

Замечательно! Создавать новое - отличное занятие. У нас есть превосходная программа для Вас.

Upverter - бесплатная платформа, разработанная специально для любителей проектирования.

Нажмите здесь, чтобы попробовать!

Если Вы хотите поговорить с представителем, пожалуйста, свяжитесь с местным офисом Altium.
Copyright © 2019 Altium Limited

Вы можете загрузить бесплатную лицензию средства просмотра Altium Designer Viewer сроком действия 6 месяцев.

Пожалуйста, заполните форму ниже, чтобы запросить эту лицензию.

Нажимая [Получить бесплатнную пробную версию], Вы соглашаетесь с нашей Политикой конфиденциальности. Вам могут приходить сообщения от компании Altium, и Вы можете изменить настройки уведомлений в любой момент.