Search In: Doc:Documentation: NEXUS Client
Altium DesignerAltium 365Altium MCAD CoDesignerAltium On-Prem Enterprise ServerCompany Dashboard
Ver: Version: 3.1
43.23.1
Close
搜索 Search on Documentation

CAM编辑器 - DRC

Created: 一月 02, 2020 | Updated: 六月 08, 2020 | Applies to versions: 3.1 and 3.2
您正在阅读的是 3.1. 版本。关于最新版本，请前往 CAM Editor - DRC Preferences 阅读 5 版本

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

Parent page: Accessing, Defining & Managing System Preferences

The CAM Editor - DRC page of the Preferences dialog.The CAM Editor - DRC page of the Preferences dialog.

Summary

The CAM Editor – DRC page of the Preferences dialog provides numerous controls relating to the general settings of the CAM Editor within the CAM design space.

Access

This page is part of the main Preferences dialog that is accessed by clicking the  control in the upper-right corner of the workspace then selecting the DRC entry under the CAM Editor folder.

Options/Controls

Starved Thermals Clearance

  • Clearance Value - use this field to set the minimum allowable distance between a thermal and another flash on a plane layer. This distance is specified as a percentage value from the thermal outer dimension.
如您发现任何问题，请选中相关文本/图片，并按 Ctrl + Enter 键向我们提交反馈。