Altium NEXUS Documentation

TileAllOpenDocuments

Modified by Admin on Apr 11, 2017
此文档页面引用了不再受支持的产品 Altium Vault, Altium Vault 及其组件管理功能已迁移到 Altium Concord Pro

Parent page: Client Commands

The following pre-packaged resources, derived from this base command, are available:


Applied Parameters: None

Summary

This command is used to present all open design documents in their own individually-tiled regions, within the main application design window.

Access

This command is accessed from most editors, by:

  • Choosing the Window » Tile command from the main menus.
  • Using the Shift+F4 keyboard shortcut.

Use

After launching the command, each open design document will be split into its own separate region. These regions will be tiled, so that you can see all documents at once.

Tiling will be across two columns, and as many rows as necessary to accommodate the number of open documents.

Tips

  1. Opening a subsequent document after using this command, will place it as a new tab in the currently active region. Run the command again in order to place this newly-opened document in its own tiled region.
  2. To place all documents back into the same, single design window, right-click on a document tab and choose the Merge All command. All documents will be merged into a single window and the document that was active prior to the merge will remain active.
  3. The active document can be opened in a new Altium NEXUS window in one of two ways. Either right-click on its tab and choose Open in New Window, or click on its tab and drag it to a point outside of the current Altium NEXUS window.


Applied Parameters: Mode=Horizontal

Summary

This command is used to present all open design documents in their own individually, horizontally-tiled regions, within the main application design window.

Access

This command is accessed from most editors, by choosing the Window » Tile Horizontally command from the main menus.

Use

After launching the command, each open design document will be split into its own separate horizontal region. These regions will be tiled, so that you can see all documents at once.

Tips

  1. Opening a subsequent document after using this command, will place it as a new tab in the currently active region. Run the command again in order to place this newly-opened document in its own horizontally-tiled region.
  2. To place all documents back into the same, single design window, right-click on a document tab and choose the Merge All command. All documents will be merged into a single window and the document that was active prior to the merge will remain active.
  3. The active document can be opened in a new Altium NEXUS window in one of two ways. Either right-click on its tab and choose Open in New Window, or click on its tab and drag it to a point outside of the current Altium NEXUS window.


Applied Parameters: Mode=Vertical

Summary

This command is used to present all open design documents in their own individually, vertically-tiled regions, within the main application design window.

Access

This command is accessed from most editors, by choosing the Window » Tile Vertically command from the main menus.

Use

After launching the command, each open design document will be split into its own separate vertical region. These regions will be tiled, so that you can see all documents at once.

Tips

  1. Opening a subsequent document after using this command, will place it as a new tab in the currently active region. Run the command again in order to place this newly-opened document in its own vertically-tiled region.
  2. To place all documents back into the same, single design window, right-click on a document tab and choose the Merge All command. All documents will be merged into a single window and the document that was active prior to the merge will remain active.
  3. The active document can be opened in a new Altium NEXUS window in one of two ways. Either right-click on its tab and choose Open in New Window, or click on its tab and drag it to a point outside of the current Altium NEXUS window.

 

Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

联系我们

联系原厂或当地办公室

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
You are reporting an issue with the following selected text
and/or image within the active document:
Altium Designer 免费试用
Altium Designer Free Trial
我们开始吧!首先,您或者您的公司已经在使用Altium Designer了吗?

如果您有任何需求,请点击这里联系获取当地办公室销售代表联系方式。.
Copyright © 2019 Altium Limited

既然您在使用Altium Designer,为何仍需要试用?

如果您有任何需求,请点击这里联系获取当地办公室销售代表联系方式。.
Copyright © 2019 Altium Limited

好的,实际上您无需下载一个试用版本。

点击下方按钮下载最新版本的Altium Designer安装包

下载Altium Designer 安装包

如果您有任何需求,请点击这里联系获取当地办公室销售代表联系方式。.
Copyright © 2019 Altium Limited

填写下方表格,获取Altium Designer最新报价。

点击[获取免费试用],并同意我们的隐私政策。您会接收到来自Altium的资讯,并允许其改变您的通知首选项。

如果您是Altium维保期内客户,您不需要下载试用版本。

如果您不是Altium维保客户,请填写下方表格免费试用。

点击[获取免费试用],并同意我们的隐私政策。您会接收到来自Altium的资讯,并允许其改变您的通知首选项。

您为何想要试用Altium Designer?

如果您有任何需求,请点击这里联系获取当地办公室销售代表联系方式。.
Copyright © 2019 Altium Limited

那您来对地方了!请填写下方表格申请试用吧。

点击[获取免费试用],并同意我们的隐私政策。您会接收到来自Altium的资讯,并允许其改变您的通知首选项。

Great News!

Valid students can get their very own 6-month Altium Designer Student License for FREE! Just fill out the form below to request your Student License today.

点击[获取免费试用],并同意我们的隐私政策。您会接收到来自Altium的资讯,并允许其改变您的通知首选项。

好的,您可以下载免费的Altium Designer Viewer查看文档,有效期6个月。

请填写下方表格申请。

点击[获取免费试用],并同意我们的隐私政策。您会接收到来自Altium的资讯,并允许其改变您的通知首选项。

好棒!创作是一件超酷的事情,我们可以为您提供完美的设计软件。

Upverter是一个社区导向的交流平台,专为您这样的创客量身定做。

点击这里看看吧!

如果您有任何需求,请点击这里联系获取当地办公室销售代表联系方式。.
Copyright © 2019 Altium Limited

好的,您可以下载免费的Altium Designer Viewer查看文档,有效期6个月。

请填写下方表格申请。

点击[获取免费试用],并同意我们的隐私政策。您会接收到来自Altium的资讯,并允许其改变您的通知首选项。