联系我们
联系原厂或当地办公室
Parent page: Draftsman Objects
A placed board Fabrication View set to the Top view side
A Draftsman Board Fabrication View is an automated graphic composite of the PCB project's unpopulated (bare) board, as viewed from the Top or Bottom. The drawing data is sourced from a specified physical board layer, and polygon copper fills can be displayed as solid, hatched or as simple outlines. Its drawing representation and data sources are all configurable in the Properties panel.
Board Fabrication Views are available for placement in a PCB project Draftsman document from the Draftsman Editor as follows:
After launching the command, drawing data is retrieved from the source PCB file, the cursor will change to a cross-hair and the rendered Fabrication View is attached to the cursor. Move the cursor to the desired position then click to confirm the placement.
Both the position and size of placed Board Fabrication View can be graphically modified.
A selected Board Fabrication View will show a node handle at the top right of the selection outline, which can be dragged to a new location to modify the view's size. To move an Board Fabrication View, drag and drop it to a new location.
Drag a selected Board Fabrication View's resize node to change its scale.
Properties page: Fabrication View Properties
The non-graphical method of editing a Board Fabrication View is available in the Draftsman Properties panel, which provides a comprehensive range of editable properties, options and design content settings for placed Draftsman views.
The Properties panel when a Board Fabrication View is selected.
To open the Properties panel and access the properties of a placed Fabrication View:
If the Properties panel is already active:
联系原厂或当地办公室