Altium NEXUS Documentation

Save

Created: December 5, 2018 | Updated: December 17, 2018
您当前阅读的版本为3.1。 关于最新版本,请参阅: 了解版本5

Parent page: LayerStackManager Commands

The following pre-packaged resource, derived from this base command, is available:


Applied Parameters: None

Summary

This command is used to save the currently active Layer Stack to the PCB document.

Access

This command can be accessed from the Layer Stack in the following ways:

  • Choose the File » Save to PCB command from the main menus.
  • Use the Ctrl+S keyboard shortcut.
Use

After launching the command, the active Layer Stack will be saved to the PCB.

Tips

  1. A modified document is flagged by an asterisk suffix next to its entry in the Projects panel. A modified document also has an asterisk next to its name in its open document tab.
Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

联系我们

联系原厂或当地办公室

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
You are reporting an issue with the following selected text
and/or image within the active document: