Altium NEXUS Documentation

LayerStackManager_Dlg-StackisnotsymmetricStack is not symmetric_AD

Created: January 3, 2019 | Updated: January 3, 2019
您当前阅读的版本为2.0。 关于最新版本,请参阅: 版本 5 的
本文档页面中提到的Altium NEXUS/NEXUS Client(Nexus部署解决方案的一部分)已停止服务。您的所有PCB设计、数据管理和协作需求现在都可以通过Altium Designer实现(通过订阅Altium Designer软件)。查看FAQs页面了解更多信息。

The Stack is not symmetric dialog

Summary

The Stack is not symmetric dialog allows you to achieve symmetry in the layer stack.

Access

The dialog is accessed by enabling the Stack Symmetry option in the Properties panel in Layer Stack Manager mode. 

Options/Controls

  • Layer stack symmetry mismatches - the grid displays all detected conflicts in layer stack symmetry.
  • Mirror top half down - the settings of each of the layers above the central dielectric layer are copied down to the symmetrical partner-layer.
  • Mirror bottom half up - the settings of each of the layers below the central dielectric layer are copied up to the symmetrical partner-layer.
  • Mirror whole stack down - an additional dielectric layer is inserted after the last copper layer, then all of the signal and dielectric layers are replicated and mirrored below this new dielectric layer.
  • Mirror whole stack up - an additional dielectric layer is inserted before the first copper layer, then all of the signal and dielectric layers are replicated and mirrored above this new dielectric layer.
Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

联系我们

联系原厂或当地办公室

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
You are reporting an issue with the following selected text
and/or image within the active document: