Altium NEXUS Documentation

EditSelectedPart

Modified by Susan Riege on Jan 18, 2019
此文档页面引用了不再受支持的产品 Altium Vault, Altium Vault 及其组件管理功能已迁移到 Altium Concord Pro

Parent page: MultiBoardAssembly Commands

The following pre-packaged resources, derived from this base command, are available:


Applied Parameters: Action=Start

Summary

This command is used to enter editing mode for the currently selected part (PCB) in the active Multi-board Assembly document (*.MbaDoc). Editing supports the positioning of components on that board only.

For a high-level look at multi-board design within Altium NEXUS, see Designing Systems with Multiple Boards.

Access

With the required PCB selected in the workspace, this command can be accessed from the Multi-board Assembly Editor by:

  • Choosing the Edit » Edit Selected Part command from the main menus.
  • Using the Ctrl+E keyboard shortcut.
  • Right-clicking anywhere in the workspace and choosing the Edit Selected Part command from the context menu.

Use

First, ensure that the PCB that you want to edit is selected. Either click directly on it in the workspace or click on its entry in the Multiboard Assembly panel.

After launching the command, you will enter part editing mode, with the selected PCB zoomed and centered (where possible) to fit within the main design window. The board will remain displayed in its full coloring, with all other boards grayed-out (Read-only).

Make changes to the placement of components as required, using manual placement and/or alignment features. Once you are finished editing, use the Finish Part Editing command (Ctrl+E).

If you want to cancel editing without implementing any of the changes, use the Cancel Part Editing command.


Applied Parameters: Action=Finish

Summary

This command is used to finish editing of the active part (PCB) in the active Multi-board Assembly document (*.MbaDoc). Any changes to the placement of components on the board will be saved.

For a high-level look at multi-board design within Altium NEXUS, see Designing Systems with Multiple Boards.

Access

With a PCB already being edited in the workspace, this command can be accessed from the Multi-board Assembly Editor by:

  • Choosing the Edit » Finish Part Editing command from the main menus.
  • Using the Ctrl+E keyboard shortcut.
  • Right-clicking anywhere in the workspace and choosing the Finish Part Editing command from the context menu.
The command only becomes available provided a part (PCB) is actively being edited.

Use

After launching the command, all changes made to the placement of components associated to the board will be saved, and you will exit part editing mode. The view of the workspace will return to fit all boards in the assembly, with the board that was being edited remaining selected.

Tips

  1. While in part editing mode, the board being actively edited remains displayed using its full coloring. All other boards, which are read-only, appear grayed out. Once this command to finish editing is used, all boards will be presented in their full coloring.


Applied Parameters: Action=Cancel

Summary

This command is used to cancel editing of the active part (PCB) in the active Multi-board Assembly document (*.MbaDoc). Any changes to the placement of components on the board will not be saved.

For a high-level look at multi-board design within Altium NEXUS, see Designing Systems with Multiple Boards.

Access

With a PCB already being edited in the workspace, this command can be accessed from the Multi-board Assembly Editor by:

  • Choosing the Edit » Cancel Part Editing command from the main menus.
  • Right-clicking anywhere in the workspace and choosing the Cancel Part Editing command from the context menu.
The command only becomes available provided a part (PCB) is actively being edited.

Use

After launching the command, all changes made to the placement of components associated to the board will be discarded, and you will exit part editing mode. The view of the workspace will return to fit all boards in the assembly, with the board that was being edited remaining selected.

Tips

  1. While in part editing mode, the board being actively edited remains displayed using its full coloring. All other boards, which are read-only, appear grayed out. Once this command to cancel editing is used, all boards will be presented in their full coloring.

 

Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

联系我们

联系原厂或当地办公室

You are reporting an issue with the following selected text
and/or image within the active document:
Altium Designer 免费试用
Altium Designer Free Trial
我们开始吧!首先,您或者您的公司已经在使用Altium Designer了吗?

如果您有任何需求,请点击这里联系获取当地办公室销售代表联系方式。.
Copyright © 2019 Altium Limited

既然您在使用Altium Designer,为何仍需要试用?

如果您有任何需求,请点击这里联系获取当地办公室销售代表联系方式。.
Copyright © 2019 Altium Limited

好的,实际上您无需下载一个试用版本。

点击下方按钮下载最新版本的Altium Designer安装包

下载Altium Designer 安装包

如果您有任何需求,请点击这里联系获取当地办公室销售代表联系方式。.
Copyright © 2019 Altium Limited

填写下方表格,获取Altium Designer最新报价。

点击[获取免费试用],并同意我们的隐私政策。您会接收到来自Altium的资讯,并允许其改变您的通知首选项。

如果您是Altium维保期内客户,您不需要下载试用版本。

如果您不是Altium维保客户,请填写下方表格免费试用。

点击[获取免费试用],并同意我们的隐私政策。您会接收到来自Altium的资讯,并允许其改变您的通知首选项。

您为何想要试用Altium Designer?

如果您有任何需求,请点击这里联系获取当地办公室销售代表联系方式。.
Copyright © 2019 Altium Limited

那您来对地方了!请填写下方表格申请试用吧。

点击[获取免费试用],并同意我们的隐私政策。您会接收到来自Altium的资讯,并允许其改变您的通知首选项。

Great News!

Valid students can get their very own 6-month Altium Designer Student License for FREE! Just fill out the form below to request your Student License today.

点击[获取免费试用],并同意我们的隐私政策。您会接收到来自Altium的资讯,并允许其改变您的通知首选项。

好的,您可以下载免费的Altium Designer Viewer查看文档,有效期6个月。

请填写下方表格申请。

点击[获取免费试用],并同意我们的隐私政策。您会接收到来自Altium的资讯,并允许其改变您的通知首选项。

好棒!创作是一件超酷的事情,我们可以为您提供完美的设计软件。

Upverter是一个社区导向的交流平台,专为您这样的创客量身定做。

点击这里看看吧!

如果您有任何需求,请点击这里联系获取当地办公室销售代表联系方式。.
Copyright © 2019 Altium Limited

好的,您可以下载免费的Altium Designer Viewer查看文档,有效期6个月。

请填写下方表格申请。

点击[获取免费试用],并同意我们的隐私政策。您会接收到来自Altium的资讯,并允许其改变您的通知首选项。