MultiBoardAssembly_Cmd-ExportPartExportPart_AD

Created: 十一月 01, 2019 | Updated: 十一月 01, 2019 | Applies to versions: 3.0, 3.1, 3.2, 4 and 5

您正在阅读的是 3.2. 版本。关于最新版本，请前往 MultiBoardAssembly_Cmd-ExportPart((ExportPart))_AD 阅读 5 版本

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

Parent page: MultiBoardAssembly Commands

The following pre-packaged resources, derived from this base command, are available:

Export to STEP File

Applied Parameters: ExportToSTEP

Summary

This command is used to export the entire Multi-Board Assembly to a STEP 3D file (*.step or *.stp).

For a high-level look at multi-board design within Altium NEXUS, see Designing Systems with Multiple Boards.

Access

This command can be accessed from the Multi-Board Assembly editor by choosing File » Export » STEP 3D from the main menus.

Use

After launching the command, the Export File dialog opens in which you can specify the STEP file to export and the location to which you want it exported.

Export to Parasolid XT File

Applied Parameters: ExportToXT

Summary

This feature is used to export the entire Multi-Board Assembly to a Parasolid file (*.x_t).

For a high-level look at multi-board design within Altium NEXUS, see Designing Systems with Multiple Boards.

Access

This command can be accessed from the Multi-Board Assembly editor by choosing File » Export » PARASOLID from the main menus.

Use

After launching the command, the Export File dialog opens in which you can specify the Parasolid file to export and the location to which you want it exported.

Export to PDF File

Applied Parameters: ExportToPDF3D

Summary

This feature is used to export a Multi-Board Assembly schematic document (*.MbsDoc) to a PDF file (*.pdf).

For a high-level look at multi-board design within Altium NEXUS, see Designing Systems with Multiple Boards.

Access

This command can be accessed from the Multi-Board Assembly Schematic editor by choosing File » Export to PDF File from the main menus.

Use

After launching the command, your system's File Explorer will open. Enter the desired name within the File name field, then select Save to save the exported file to your system.

适合打印版本

如您发现任何问题，请选中相关文本/图片，并按 Ctrl + Enter 键向我们提交反馈。

MultiBoardAssembly_Cmd-ExportPartExportPart_AD

Summary

Access

Summary

Access

Summary

Access

Was this page helpful?