Sch_Dlg-ImplementationMapFormModel Map_AD

您正在阅读的是 4.0. 版本。关于最新版本,请前往 Sch_Dlg-ImplementationMapForm((Model Map))_AD 阅读 5 版本
Applies to NEXUS Client versions: 4 and 5

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

The Model Map dialog
The Model Map dialog

Summary

The Model Map dialog allows you to map component pins with model pins.

Access

The dialog is accessed by clicking the Pin Map button in the PCB Model dialog.

Options/Controls

  • Component Pin Designator – lists all component pins. This field is not editable.
  • Model Pin Designator – lists the model pin number. This field can be edited to match a component pin.

    To map a component pin to multiple model pins, enter the list of model pin numbers separated by commas to the appropriate cell of the Model Pin Designator column.