Configuring Schematic Blanket Object Properties in Altium NEXUS

您正在阅读的是 1.1. 版本。关于最新版本,请前往 Configuring Schematic Blanket Object Properties in Altium NEXUS 阅读 4 版本

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

 

Parent page: Blanket

Schematic Editor object properties are definable options that specify the visual style, content and behavior of the placed object. The property settings for each type of object are defined in two different ways:

  • Pre-placement settings – most Blanket object properties, or those that can logically be pre-defined, are available as editable default settings on the Schematic - Defaults page of the Preferences dialog (access from the  button at the top-right of the workspace). Select the object in the Primitive List to reveal its options on the right.
  • Post-placement settings – all Blanket object properties are available for editing in the Properties panel when a placed Blanket is selected in the workspace.

The Blanket default settings in the Preferences dialog and the Blanket mode of the Properties panel            The Blanket default settings in the Preferences dialog and the Blanket mode of the Properties panel

Properties

  • Border ​Width - use the drop-down to select the desired border width. Choices are: Smallest, Small, Medium, and Large
  • Line Style - use the drop-down to select the desired line style. Choices are: Solid, Dashed, Dotted, and Dash Dotted.
  • Border Color - click the color box to select the desired color for the border.
  • Fill Color - click the color box to select the desired color for the fill.
  • Collapsed and Disabled - check to collapse and disable blankets.
If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.
Content