Altium NEXUS Documentation

Zoom

Modified by Jason Howie on Apr 11, 2017

Parent page: SimView Commands

The following pre-packaged resources, derived from this base command, are available:


Applied Parameters: Action = InAtCursor

Summary

This command is used to bring the waveform(s) closer to you, relative to the cursor position, in the active simulation analysis chart.

Access

This command is accessed from the SimData Editor by using the PgUp keyboard shortcut.

Use

Launch the command to zoom in on a particular section of a waveform. Use the command repeatedly to zoom in more.

Tips

  1. As this command is relative to the cursor position, it is a good idea to position the cursor in the desired location prior to launching the command, and then use the shortcut.
  2. Zooming is applied to all waveforms in all wave plots in the chart, and is therefore independent of waveform/wave plot selection.


Applied Parameters: Action = OutAtCursor

Summary

This command is used to move the waveform(s) away from you, relative to the cursor position, in the active simulation analysis chart.

Access

This command is accessed from the SimData Editor by using the PgDn keyboard shortcut.

Use

Launch the command to zoom out from a particular section of a waveform. Use the command repeatedly to zoom out more.

Tips

  1. As this command is relative to the cursor position, it is a good idea to position the cursor in the desired location prior to launching the command, and then use the shortcut.
  2. Zooming is applied to all waveforms in all wave plots in the chart, and is therefore independent of waveform/wave plot selection.


Applied Parameters: Action = Redraw

Summary

This command is used to refresh the screen, in effect performing a redraw of the active simulation analysis chart, to remove any undesired drawing update effects.

Access

This command can be accessed from the SimData Editor by:

  • Choosing the View » Refresh command from the main menus.
  • Using the End keyboard shortcut.

Use

After launching the command, the screen will be refreshed and the active chart redrawn.

Tips

  1. This command does not affect the current view setting of the Waveform Analysis window.


Applied Parameters: Action = InAtCenter

Summary

This command is used to bring the waveform(s) closer to you (zoom in), relative to the center positions of each associated wave plot, in the active simulation analysis chart.

Access

  • Choosing the View » Zoom In command from the main menus.
  • Clicking the  button on the SimView Standard toolbar.
  • Using the Z keyboard shortcut to access a pop-up menu of zoom commands, then choosing the Zoom In entry on that menu.

Use

Launch the command to zoom in at the center of each wave plot. Use the command repeatedly to zoom in more.

Tips

  1. Zooming is applied to all wave plots in the chart and is therefore independent of wave plot selection.


Applied Parameters: Action = OutAtCenter

Summary

This command is used to move the waveform(s) away from you (zoom out), relative to the center positions of each associated wave plot, in the active simulation analysis chart.

Access

  • Choosing the View » Zoom Out command from the main menus.
  • Clicking the  button on the SimView Standard toolbar.
  • Using the Z keyboard shortcut to access a pop-up menu of zoom commands, then choosing the Zoom Out entry on that menu.

Use

Launch the command to zoom out at the center of each wave plot. Use the command repeatedly to zoom out more.

Tips

  1. Zooming is applied to all wave plots in the chart and is therefore independent of wave plot selection.

 

Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

联系我们

联系原厂或当地办公室

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
You are reporting an issue with the following selected text
and/or image within the active document:
Altium Designer 免费试用
Altium Designer Free Trial
我们开始吧!首先,您或者您的公司已经在使用Altium Designer了吗?

如果您有任何需求,请点击这里联系获取当地办公室销售代表联系方式。.
Copyright © 2019 Altium Limited

既然您在使用Altium Designer,为何仍需要试用?

如果您有任何需求,请点击这里联系获取当地办公室销售代表联系方式。.
Copyright © 2019 Altium Limited

好的,实际上您无需下载一个试用版本。

点击下方按钮下载最新版本的Altium Designer安装包

下载Altium Designer 安装包

如果您有任何需求,请点击这里联系获取当地办公室销售代表联系方式。.
Copyright © 2019 Altium Limited

填写下方表格,获取Altium Designer最新报价。

点击[获取免费试用],并同意我们的隐私政策。您会接收到来自Altium的资讯,并允许其改变您的通知首选项。

如果您是Altium维保期内客户,您不需要下载试用版本。

如果您不是Altium维保客户,请填写下方表格免费试用。

点击[获取免费试用],并同意我们的隐私政策。您会接收到来自Altium的资讯,并允许其改变您的通知首选项。

您为何想要试用Altium Designer?

如果您有任何需求,请点击这里联系获取当地办公室销售代表联系方式。.
Copyright © 2019 Altium Limited

那您来对地方了!请填写下方表格申请试用吧。

点击[获取免费试用],并同意我们的隐私政策。您会接收到来自Altium的资讯,并允许其改变您的通知首选项。

Great News!

Valid students can get their very own 6-month Altium Designer Student License for FREE! Just fill out the form below to request your Student License today.

点击[获取免费试用],并同意我们的隐私政策。您会接收到来自Altium的资讯,并允许其改变您的通知首选项。

好的,您可以下载免费的Altium Designer Viewer查看文档,有效期6个月。

请填写下方表格申请。

点击[获取免费试用],并同意我们的隐私政策。您会接收到来自Altium的资讯,并允许其改变您的通知首选项。

好棒!创作是一件超酷的事情,我们可以为您提供完美的设计软件。

Upverter是一个社区导向的交流平台,专为您这样的创客量身定做。

点击这里看看吧!

如果您有任何需求,请点击这里联系获取当地办公室销售代表联系方式。.
Copyright © 2019 Altium Limited

好的,您可以下载免费的Altium Designer Viewer查看文档,有效期6个月。

请填写下方表格申请。

点击[获取免费试用],并同意我们的隐私政策。您会接收到来自Altium的资讯,并允许其改变您的通知首选项。