Altium NEXUS Documentation

SplitEditor

Modified by Admin on Apr 11, 2017

Parent page: TextEdit Commands

The following pre-packaged resources, derived from this base command, are available:


Applied Parameters: Mode=None

Summary

This command is used to combine the separate regions of a document that has been previously split - either horizontally or vertically - thus reverting back to a single window for the document.

Access

Choose Window » Remove Split from the main menus.

Use

After launching the command, the view for the current document will revert back to a single window.

Tips

  1. If the document had previously been split horizontally, the area of the document that will be displayed when the split is removed, will be that currently displayed in the bottom section.
  2. If the document had previously been split vertically, the area of the document that will be displayed when the split is removed, will be that currently displayed in the right-hand section.


Applied Parameters: Mode=Horizontal

Summary

This command is used to 'split' the display of the current document into two distinct horizontal sections, allowing you to browse and edit two different areas of the same document.

Access

Choose Window » Split Horizontally from the main menus.

Use

After launching the command, the document window will be divided, horizontally, into two equal sections. A 'splitter bar' divides the two sections. Click and drag this dividing bar up or down, to change the area of document visible in each section.

You are now able to freely browse and edit different areas of the (single) current document.

Tips

  1. When the command is launched, the document is divided into two equal halves. The top half will show an area starting from the beginning (top) of the document. The bottom half will show an area starting from the point in the document that was originally at the top of the display window prior to launching the command.
  2. To revert back to a single window for the document, use the Remove Split command, accessed from the Window menu. The area of the document that will be displayed when the split is removed will be that currently displayed in the bottom section.
  3. If you want to change the split mode from horizontal to vertical, simply use the Split Vertically command, also accessed from the Window menu.


Applied Parameters: Mode=Vertical

Summary

This command is used to 'split' the display of the current document into two distinct vertical sections, allowing you to browse and edit two different areas of the same document.

Access

Choose Window » Split Vertically from the main menus.

Use

After launching the command, the document window will be divided, vertically, into two equal sections. A 'splitter bar' divides the two sections. Click and drag this dividing bar left or right, to change the area of document visible in each section.

Tips

  1. When the command is launched, the document is divided into two equal halves. The left half will show an area starting from the beginning (top) of the document, with the horizontal scrollbar fully to the left. The right half will show an area starting from the point in the document that was originally at the top of the display window prior to launching the command. Again, the horizontal scrollbar will be set fully to the left.
  2. To revert back to a single window for the document, use the Remove Split command, accessed from the Window menu. The area of the document that will be displayed when the split is removed will be that currently displayed in the right-hand section.
  3. If you want to change the split mode from vertical to horizontal, simply use the Split Horizontally command, also accessed from the Window menu.

 

Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

联系我们

联系原厂或当地办公室

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
You are reporting an issue with the following selected text
and/or image within the active document:
Altium Designer 免费试用
Altium Designer Free Trial
我们开始吧!首先,您或者您的公司已经在使用Altium Designer了吗?

如果您有任何需求,请点击这里联系获取当地办公室销售代表联系方式。.
Copyright © 2019 Altium Limited

既然您在使用Altium Designer,为何仍需要试用?

如果您有任何需求,请点击这里联系获取当地办公室销售代表联系方式。.
Copyright © 2019 Altium Limited

好的,实际上您无需下载一个试用版本。

点击下方按钮下载最新版本的Altium Designer安装包

下载Altium Designer 安装包

如果您有任何需求,请点击这里联系获取当地办公室销售代表联系方式。.
Copyright © 2019 Altium Limited

填写下方表格,获取Altium Designer最新报价。

点击[获取免费试用],并同意我们的隐私政策。您会接收到来自Altium的资讯,并允许其改变您的通知首选项。

如果您是Altium维保期内客户,您不需要下载试用版本。

如果您不是Altium维保客户,请填写下方表格免费试用。

点击[获取免费试用],并同意我们的隐私政策。您会接收到来自Altium的资讯,并允许其改变您的通知首选项。

您为何想要试用Altium Designer?

如果您有任何需求,请点击这里联系获取当地办公室销售代表联系方式。.
Copyright © 2019 Altium Limited

那您来对地方了!请填写下方表格申请试用吧。

点击[获取免费试用],并同意我们的隐私政策。您会接收到来自Altium的资讯,并允许其改变您的通知首选项。

Great News!

Valid students can get their very own 6-month Altium Designer Student License for FREE! Just fill out the form below to request your Student License today.

点击[获取免费试用],并同意我们的隐私政策。您会接收到来自Altium的资讯,并允许其改变您的通知首选项。

好的,您可以下载免费的Altium Designer Viewer查看文档,有效期6个月。

请填写下方表格申请。

点击[获取免费试用],并同意我们的隐私政策。您会接收到来自Altium的资讯,并允许其改变您的通知首选项。

好棒!创作是一件超酷的事情,我们可以为您提供完美的设计软件。

Upverter是一个社区导向的交流平台,专为您这样的创客量身定做。

点击这里看看吧!

如果您有任何需求,请点击这里联系获取当地办公室销售代表联系方式。.
Copyright © 2019 Altium Limited

好的,您可以下载免费的Altium Designer Viewer查看文档,有效期6个月。

请填写下方表格申请。

点击[获取免费试用],并同意我们的隐私政策。您会接收到来自Altium的资讯,并允许其改变您的通知首选项。