WorkspaceManager_Err-FloatingDirectiveObjectFloating Directive Object_AD

您正在阅读的是 4. 版本。关于最新版本,请前往 WorkspaceManager_Err-FloatingDirectiveObject((Floating Directive Object))_AD 阅读 5 版本

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

 

Parent category: Violations Associated with Others

Default report mode: 

Summary

This violation occurs when there is a floating Parameter Set directive, NoERC directive, Differential Pair directive, or Probe object.

Notification

If a design project is being finalized and contains a floating Parametric Set directive, NoERC directive, Diff Pair directive, or Probe object, this is indicated during project Validation by demonstrating the warning in the Messages panel

A notification is displayed in the Messages panel in the following format:

Floating <Parameter Set directive, NoERC directive, Differential Pair directive, or Probe object> at <coordinates>,

where:

  • Parameter Set directive, NoERC directive, Differential Pair directive, or Probe object is the floating object located on the design space. 
  • Coordinate is the location at which the floating parameter is located on the design space. 

Recommendation for Resolution

Attach the floating Parameter Set directive, NoERC directive, Differential Pair directive, or Probe object to their intended location. 

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.
Content