WorkspaceManager_Err-HarnessObjectOnAWireHarness Object on a Wire_AD

This document is no longer available beyond version 4.0. Information can now be found here: Harness Object on a Wire for version 5

Applies to NEXUS Client version: 4

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

 

Parent category: Violations Associated with Nets

Default report mode:

Summary

This violation occurs when an object such as a Port, Sheet Entry, or Harness Entry has an associated Harness Type, which represents a connection to a Signal Harness, however, the object is connected to a wire.

Notification

If compiler errors and warnings are enabled for display on the schematic (enabled on the Schematic - Compiler page of the Preferences dialog), an offending object will display a colored squiggle beneath it. Hovering over the object will display a pop-up hint that summarizes the violation. A notification is also displayed in the Messages panel in the following format:

Harness <Object> <ObjectName> at <Location> placed on wire

where:

  • Object is the offending Port, Sheet Entry, or Harness Entry.
  • ObjectName is the label of the offending object.
  • Location is the X,Y coordinates for the offending object.

Recommendation for Resolution

Use the Details region of the Messages panel to quickly cross probe to the offending object (Port, Sheet Entry, or Harness Entry). Ensure that the object is not connected to a wire, but rather a signal harness.

Tip

  • Object hints will only appear provided the Enable Connectivity Insight option is enabled on the System - Design Insight page of the Preferences dialog. Use the controls associated with the Object Hints entry in the Connectivity Insight Options region of the page to determine the launch style for such hints (Mouse Hover and/or Alt+Double Click). 
Content