New Draftsman Document

Now reading version 16.1. For the latest, read: New Draftsman Document for version 17.1
Applies to Altium Designer version: 16.1

The New Draftsman Document dialog.
The New Draftsman Document dialog.

Summary

The New Draftsman Document dialog allows for the creation of a new Draftsman document (*.PCBDwf) for a chosen project and source PCB document. You have the option to create the new document based on a defined Draftsman Document Template (*.DwfDot), or create a blank, A4-sized document.

For a high-level look at how the Altium Draftsman Drawing System provides an interactive approach to the creation of production documentation for your PCBs, see Draftsman.

Access

The dialog can be accessed in the following ways:

  • From any editor, by choosing the File » New » Draftsman Document command from the main menus.
  • Right-clicking on the entry for the required project, in the Projects panel, and choosing the Add New to Project » Draftsman Document command from the context menu.

Options/Controls

  • Templates List - this list includes any defined Draftsman Document Templates (*.DwfDot) found in the Templates Location, specified on the Draftsman - Templates page of the Preferences dialog. Select one of these templates to use in creating the new Draftsman document. Alternatively, to create a new blank, A4-sized Draftsman document (*.PCBDwf), select the [Default] entry.
Three Draftsman Document Template files are supplied as part of the installation: Assy Drawing - Main views (rect. board 3x1).DwfDot, Assy Drawing - Main views (square board).DwfDot, and Default Fabrication Drawing.DwfDot. For a default installation of Altium Designer, these can be found in the following location (which is the default Templates Location): \ProgramData\Altium\Altium Designer <GUID>\Extensions\Draftsman\Templates. The default Draftsman Document - Default.PCBDwf - which is used when you select [Default] in the list of templates, is also found here.
  • Templates - click this button to quickly access the Draftsman - Templates page of the Preferences dialog, where the location of the templates directory is defined.
  • Layers - the options here determine which board layers - Signal/Plane, Mask, Paste, Silk, (as defined by the Layer Stack) are used to generate Fabrication drawings in the document (at one per sheet), when a Fabrication document template is used. Drawing layers are always included.
  • Project - use this field to select the specific PCB project that you want to create the new Draftsman document for. The drop-down will present a list of all possible projects that are currently open. The newly created Draftsman document will be added to the nominated project.
  • Source Document - with the project selected in the field above, this field will typically auto-populate with the PCB design document found within that project. Use the drop-down to select the right board if more than one are defined within the project. The new Draftsman document will use the specified source board document as its context for drawing data from.

Tips

  1. A Draftsman Sheet Template (*.DwsDot) can be applied once the new document has been created. You will be able to choose from local templates, found in the specified Templates Location. A range of such templates are provided as part of the installation, and located in the default templates location.
Note

The features available depend on your level of Altium Designer Software Subscription.