Altium Designer Documentation

Query_Lang-PCBFunctions_AttributeChecks_CompCenterXCompCenterX_AD

Created: September 12, 2015 | Updated: August 9, 2021

Parent page: PCB Query Functions - Attribute Checks

Summary

Returns component objects when the X-Coordinate of the centroid of all of their child objects complies with the Query.

Syntax

CompCenterX : Number

The entered coordinate is always in units of mils, irrespective of the measurement unit chosen for the board. (1 mil = 0.001 inch).

Example Usage

CompCenterX = 1200
Returns all component objects when the X-Coordinate of the centroid of all of their child objects is equal to 1200mil.

CompCenterX >= 1500
Returns all component objects when the X-Coordinate of the centroid of all of their child objects is greater than, or equal to, 1500mil.

CompCenterX Between 1000 And 1400
Returns all component objects when the X-Coordinate of the centroid of all of their child objects is greater than, or equal to, 1000mil, and less than, or equal to, 1400mil.

CompCenterX < 800
Returns all objects except component objects when the X-Coordinate of the centroid of all of their child objects is greater than, or equal to, 800mil.

Tips

  1. The associated child objects of the complying component objects are also returned.
Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

Contact Us

Contact our corporate or local offices directly.

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
You are reporting an issue with the following selected text
and/or image within the active document: