Pad_CornerRadius_MidLayer13

Now reading version 18.1. For the latest, read: Pad_CornerRadius_MidLayer13 for version 21
Applies to Altium Designer versions: 15.1, 16.0, 16.1, 17.0, 17.1, 18.0, 18.1, 19.0, 19.1, 20.0, 20.1 and 20.2

Parent page: PCB Query Functions - Fields

Summary

Returns pad objects whose Pad Corner Radius (%) (Mid Layer 13) property complies with the Query.

Syntax

Pad_CornerRadius_MidLayer13 = CornerRadius_String
Pad_CornerRadius_MidLayer13 <> CornerRadius_String

CornerRadius_String specifies the corner radius, expressed as a percentage.

Example Usage

Pad_CornerRadius_MidLayer13 = '50%'
Returns all pad objects whose Pad Corner Radius (%) (Mid Layer 13) property equals 50%.

Pad_CornerRadius_MidLayer13 <> '30%'
Returns all objects except for pad objects whose Pad Corner Radius (%) (Mid Layer 13) property equals 30%.

Tips

  1. The single quote characters (') at the start and end of CornerRadius_String are mandatory.
  2. For simple pads (with Stack Mode set to Simple) the Pad Corner Radius (%) (Mid Layer 13) property will be the same as the Pad Corner Radius (%) (All Layers) property, since the specified Corner Radius is used for all signal layers.
  3. For Top-Middle-Bottom pads (with Stack Mode set to Top-Middle-Bottom) the Pad Corner Radius (%) (Mid Layer 13) property will be the same as the Pad Corner Radius (%) (Mid Layer 1) property, since the Corner Radius specified for Signal Layer 1 is applied to all internal ('middle') signal layers.
  4. The Pad Corner Radius (%) (Mid Layer 13) property is only defined for pad objects.

 

Note

The features available depend on your level of Altium Designer Software Subscription.