PadXSize_AllLayers

Now reading version 18.1. For the latest, read: PadXSize_AllLayers for version 21
Applies to Altium Designer versions: 15.1, 16.0, 16.1, 17.0, 17.1, 18.0, 18.1, 19.0, 19.1, 20.0, 20.1 and 20.2

Parent page: PCB Query Functions - Fields

Summary

Returns all simple pad objects, whose X Size (All Layers) property complies with the Query.

Syntax

PadXSize_AllLayers : Number

Number will follow the measurement units currently employed for the document – either Imperial (mil; 1mil = 0.001inch) or Metric (mm; 1mm = 0.001meter).

A specific option for the measurement unit can be specified – overriding the default units specified at the document level – through use of an additional measurement unit-based keyword:

  • AsMils(PadXSize_AllLayers) : Number – to specify a size in mil.
  • AsMM(PadXSize_AllLayers) : Number – to specify a size in mm.

Example Usage

PadXSize_AllLayers = 100
Returns all simple pad objects whose X Size (All Layers) property is equal to 100 current measurement units.

PadXSize_AllLayers >= 4.064
Returns all simple pad objects whose X Size (All Layers) property is greater than, or equal to, 4.064 current measurement units.

AsMils(PadXSize_AllLayers) > 80
Returns all simple pad objects whose X Size (All Layers) property is greater than 80mil.

AsMM(PadXSize_AllLayers) Between 1.524 And 3.81
Returns all simple pad objects whose X Size (All Layers) property is greater than or equal to 1.524mm and less than or equal to 3.81mm.

PadXSize_AllLayers <> 50
Returns all simple pad objects whose X Size (All Layers) property is not equal to 50 current measurement units.

Tips

  1. The X Size (All Layers) property is only defined for pads and vias whose Stack Mode property is set to Simple.

 

Note

The features available depend on your level of Altium Designer Software Subscription.