AsMils

This document is no longer available beyond version 21. Information can now be found here: AsMils for version 24

Applies to Altium Designer version: 21

Parent page: PCB Query Functions - Membership Checks

Summary

For numeric properties of objects (e.g. height, width, radius, etc), this keyword is used to convert the current value - measured in the default workspace units - into imperial units - mil - where 1mil = 0.001inch, which is then tested against the value entered in the expression.

Syntax

AsMils(Keyword : Number) : Number

Example Usage

AsMils(ArcRadius) = 250
Returns all arc objects that have a Radius property which is 250mil.

AsMils(Height) Between 300 And 500
Returns all component objects that have a Height property which is greater than, or equal to, 300mil, and less than, or equal to, 500mil.

AsMils(PolygonGridSize) >= 10
Returns all polygon pour objects that have a Grid Size property which is greater than, or equal to, 10mil.

AsMils(Width) < 50
Returns all arc and track objects that have a Width property which is less than 50mil.

AsMils(TraceLength) = 10
Returns all arc and track objects that have a Length which is equal to 10mil.

Note - due to an issue in the software, to correctly detect the TraceLength using the AsMils keyword the board units must be set to mils before running the query.

 

Note

The features available depend on your level of Altium Designer Software Subscription.