Batch State Change

Now reading version 4. For the latest, read: Batch State Change for version 5

Nexus message

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

The Batch state change dialog
The Batch state change dialog

Summary

The Batch state change dialog allows you to change the state of one or more items at once in a single batch process.

Access

The dialog is accessed from the Explorer panel and the Components panel by selecting the required item(s), right-clicking then selecting Operations » Change State from the context menu.

Options/Controls

  • Grid - displays information about the selected items designated to be updated in the batch process. Click on the link for an item under the Next State column to access a drop-down from which you can select an alternate Next State option.
  • Add - select to open the Choose Item Revisions dialog to add additional items.
  • Remove - select to remove selected items.
  • Process - click to change the Lifecycle state of all the listed items. A confirmation dialog will open; enter a comment if required (this is stored as part of the Item History) then click Yes to complete the batch Lifecycle state change.

Right-click Menu

  • Load linked
    • Load Children - select to load Lifecycle state information from an item's children into that item.
    • Load Parents - select to load Lifecycle state information from an item's parents into that item.
  • Add - select to open the Choose Item Revisions dialog to add additional item(s).
  • Remove - select to remove selected items.
  • Validate transitions - select to validate the status of all items. If an item fails validation, the reason will be listed under the Status column. If an item passes validation, the Status changes to Valid.
  • Columns - use the sub-menu to select or deselect columns to display.
If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.
Content