Altium NEXUS Documentation

Board Outline Creation Successful

Created: September 29, 2017 | Updated: September 29, 2017

The Board Outline Creation Successful dialog
The Board Outline Creation Successful dialog

Summary

The Board Outline Creation Successful dialog provides controls to adjust the board outline's alignment when defining the board shape based on an existing 3D body. DRC checking for the model part also can be disabled and hidden.

Access

The dialog is accessed from the 3D mode of the PCB Editor by clicking Design » Board Shape » Define from 3D body from the main menus then selecting a 3D body on the board.

Options/Controls

  • Hide and disable DRC checking for the model part - enable to hide and disable any DRC checking for the model part. This option is enabled by default. 
  • Modify model height - select the option desired for determining how the 3D model is aligned with the board. The options are:
    • To align face with top PCB board surface
    • To align face with bottom PCB board surface
    • Do not modify model position
Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

Contact Us

Contact our corporate or local offices directly.

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
You are reporting an issue with the following selected text
and/or image within the active document: