Create Differential Pairs From Nets

Now reading version 2.1. For the latest, read: Create Differential Pairs From Nets for version 5

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.


The Create Differential Pairs From Nets dialog

Summary

The Create Differential Pairs From Nets dialog provides controls to create differential pair objects using net names conforming to a naming convention with a common prefix, followed by a consistent positive/negative suffix, for example, TX0_P and TX0_N.

Access

The dialog is accessed from the PCB panel by clicking the Create From Nets button (lower left area of the panel) when in Differential Pairs Editor mode.

Options/Controls

The filters at the top of the dialog can be used to show net pairs based on existing net names.

  • Use nets from class - click to choose the source net class from which differential pairs will be created. The default is All Nets.
  • differing by - specify a suffix for positive and negative nets. The default values are _H and _L.
  • to create differential pair with prefix - specify the prefix for positive and negative nets. The default value is D_.
  • Create differential pairs in class - choose the target class in which the differential pairs will be located.
  • Differential Pairs List - lists all differential pairs created from nets.
  • Execute - click to create differential pairs.
If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.