Configuring PCB String Object Properties in Altium NEXUS

Parent page: String

PCB Editor object properties are definable options that specify the visual style, content and behavior of the placed object. The property settings for each type of object are defined in two different ways:

• Pre-placement settings – most String object properties, or those that can logically be pre-defined, are available as editable default settings on the PCB Editor - Defaults page of the Preferences dialog (accessed from the  button at the top-right of the workspace). Select the object in the Primitive List to reveal its options on the right.
• Post-placement settings – all String object properties are available for editing in the Properties panel when a placed String is selected in the workspace.

   The String default settings in the Preferences dialog and the Text mode of the Properties panel

Location (Properties panel only) 

The  icon to the right of this region must be displayed as  (unlocked) in order to access the below fields. Toggle the lock/unlock icon to change its lock status. 

• (X/Y)
  • X (first field) - the current X (horizontal) coordinate of the reference point of the string, relative to the current workspace origin. Edit to change the X position of the string. The value can be entered in either metric or imperial; include the units when entering a value whose units are not the current default. 
  • Y (second field) - The current Y (vertical) coordinate of the reference point of the string, relative to the current origin. Edit to change the Y position of the string. The value can be entered in either metric or imperial; include the units when entering a value whose units are not the current default. 
• Rotation - specify the rotation of the String. The minimum angular resolution is 0.001 degrees.

Properties

• Text - enter the desired text.​ Click  to access a drop-down from which you can select the type of special string(s) to add, if desired. Refer to the String object page for a list of special strings and descriptions of each.
• ​​Layer - use the drop-down to select the desired layer.​ Enable Mirror if desired.
• Text Height - specify the height of the string.

Font Type

• TrueType - select to use fonts available on your PC (in the \Windows\Fonts folder). TrueType fonts offer full Unicode support. By default, the software links to a used TrueType font (they are not stored in the PCB file), which means the same font must be present on each PC to which the design is moved. Alternatively, embed used TrueType fonts in the PCB file using the options in the PCB Editor - True Type Fonts page of the Preferences dialog, where you can also select a Substitution Font to be used if a non-embedded Font is not available.
  • Font - use the drop-down to select the desired TrueType font. Use the B (bold) and/or I (italic) options to add emphasis to the text as required. 
    • Inverted - use to have the text displayed as inverted with control over the size of the border around the text. Use the following options to further configure the text:
      • Size (Width/Height) -
        • Width - the width of the border rectangle.
        • Height - the height of the border rectangle.
      • Justification - use the set the location of the string within the border rectangle.
        • Horizontal - use the drop-down to select the horizontal justification: Left, Center, or Right.
        • Vertical - use the drop-down to select the vertical justification: Top, Center, or Bottom.
      • Border Mode - use to specify the border surrounding the string.
        • Margin/Offset 
          • Text Offset - the amount the string is offset back from the edge/corner that it is justified against. This option has no effect when the Center justification mode is chosen. This option is not available for Margin.
          • Margin Border - use to specify the size of the margin border surrounding the string. This option is not available for Offset.
• Stroke  
  • Font - use the drop-down to select the desired Stroke font. Choices are:
    • Default - a simple vector font designed for pen plotting and vector photo plotting. 
    • Sans Serif - a complex font that will slow down vector output generation, such as Gerber.
    • Serif - a complex font that will slow down vector output generation, such as Gerber.
  • Stroke Width - displays the width of the stroke.
• BarCode - used to tag and identify PCBs, streamlining inventory tracking, for example, through the use of automated scan-machines.
  • Type - select one of the following bar code types: 
    • Code 39 - the US Department of Defense standard; often referred to as Code 3 of 9. It is also used in the automotive industry.
    • Code 128 - the global trade identification standard; supports any of the ASCII 128 character set (all digits, character, and punctuation marks).
  • Render Mode - choose a render mode for barcode display: Min Single Bar Width or Full BarCode Width.
    • Full Width - specify the overall width of the bar code. This option is not available if Min Single Bar Width is selected.
    • Full Height - specify the overall height of the bar code.
    • Min Width - specify the minimum width of the bar code. This field is not available if Full BarCode Width is selected.
    • Horizontal Margin - this field defines the size of the margin on the left and right edges. 
    • Vertical Margin - this field defines the size of the margin on the top and bottom edges.
    • Font Name - use the drop-down to select the font.
      • Show Text - enable to display the actual text string from which the barcode is derived (i.e. the string entered in the Text field).
      • Inverted - when enabled, the bars are inverted and a border is added on all four sides.