CompCenterX

This document is no longer available beyond version 4. Information can now be found here: CompCenterX for version 5

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

Parent page: PCB Query Functions - Attribute Checks

Summary

Returns component objects when the X-Coordinate of the centroid of all of their child objects complies with the Query.

Syntax

CompCenterX : Number

The entered coordinate is always in units of mils, irrespective of the measurement unit chosen for the board. (1 mil = 0.001 inch).

Example Usage

CompCenterX = 1200
Returns all component objects when the X-Coordinate of the centroid of all of their child objects is equal to 1200mil.

CompCenterX >= 1500
Returns all component objects when the X-Coordinate of the centroid of all of their child objects is greater than, or equal to, 1500mil.

CompCenterX Between 1000 And 1400
Returns all component objects when the X-Coordinate of the centroid of all of their child objects is greater than, or equal to, 1000mil, and less than, or equal to, 1400mil.

CompCenterX < 800
Returns all objects except component objects when the X-Coordinate of the centroid of all of their child objects is greater than, or equal to, 800mil.

Tips

  1. The associated child objects of the complying component objects are also returned.
If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.