ArcRadius

This document is no longer available beyond version 4. Information can now be found here: ArcRadius for version 5

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

Parent page: PCB Query Functions - Fields

Summary

Returns all arc objects whose Radius property complies with the Query.

Syntax

ArcRadius : Number

Number will follow the measurement units currently employed for the document – either Imperial (mil; 1mil = 0.001inch) or Metric (mm; 1mm = 0.001meter).

A specific option for the measurement unit can be specified – overriding the default units specified at the document level – through use of an additional measurement unit-based keyword:

  • AsMils(ArcRadius) : Number – to specify a radius in mil.
  • AsMM(ArcRadius) : Number – to specify a radius in mm.

Example Usage

ArcRadius = 300
Returns all arc objects that have a Radius property which is 300 current measurement units.

ArcRadius >= 15.24
Returns all arc objects that have a Radius property which is greater than, or equal to, 15.24 current measurement units.

AsMils(ArcRadius) > 500
Returns all arc objects that have a Radius property which is greater than 500mil.

AsMM(ArcRadius) Between 10.16 And 17.78
Returns all arc objects that have a Radius property which is greater than, or equal to, 10.16mm and less than, or equal to, 17.78mm.

ArcRadius <> 550
Returns all arc objects that have a Radius property which is not equal to 550 current measurement units.

AsMils(ArcRadius) <= 650
Returns all arc objects that have a Radius property which is less than, or equal to, 650mil.

AsMM(ArcRadius) < 11.43
Returns all arc objects that have a Radius property which is less than 11.43mm.

Tips

  1. The Radius property is only defined for arc objects.

 

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.