Altium NEXUS Documentation

Query_Lang-PCBFunctions_Fields_ArcRadiusArcRadius_AD

Created: August 2, 2022 | Updated: August 2, 2022
This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer (with Altium Designer Enterprise Subscription) and a connected Altium 365 Workspace. Check out the FAQs page for more information.

Parent page: PCB Query Functions - Fields

Summary

Returns all arc objects whose Radius property complies with the Query.

Syntax

ArcRadius : Number

Number will follow the measurement units currently employed for the document – either Imperial (mil; 1mil = 0.001inch) or Metric (mm; 1mm = 0.001meter).

A specific option for the measurement unit can be specified – overriding the default units specified at the document level – through use of an additional measurement unit-based keyword:

  • AsMils(ArcRadius) : Number – to specify a radius in mil.
  • AsMM(ArcRadius) : Number – to specify a radius in mm.

Example Usage

ArcRadius = 300
Returns all arc objects that have a Radius property which is 300 current measurement units.

ArcRadius >= 15.24
Returns all arc objects that have a Radius property which is greater than, or equal to, 15.24 current measurement units.

AsMils(ArcRadius) > 500
Returns all arc objects that have a Radius property which is greater than 500mil.

AsMM(ArcRadius) Between 10.16 And 17.78
Returns all arc objects that have a Radius property which is greater than, or equal to, 10.16mm and less than, or equal to, 17.78mm.

ArcRadius <> 550
Returns all arc objects that have a Radius property which is not equal to 550 current measurement units.

AsMils(ArcRadius) <= 650
Returns all arc objects that have a Radius property which is less than, or equal to, 650mil.

AsMM(ArcRadius) < 11.43
Returns all arc objects that have a Radius property which is less than 11.43mm.

Tips

  1. The Radius property is only defined for arc objects.

 

Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

Contact Us

Contact our corporate or local offices directly.

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
You are reporting an issue with the following selected text
and/or image within the active document: