Altium NEXUS Documentation

Place Specific NoERC

Created: July 28, 2015 | Updated: June 19, 2017

The Place Specific NoERC dialog.
The Place Specific NoERC dialog.

Summary

The Specific No ERC dialog allows the designer to suppress specific errors or warnings resulting from a Project Compile.  

Access

The Specific No ERC dialog can be accessed from the (Place » Directives » Place Specific No ERC) menu.  

Options/Controls

  • Compile Errors by Net - This column displays nets in the current project that have errors or warnings resulting from a compile.
  • Suppress - This column allows designers to select specific nets to be included by the No ERC.
  • Show selected net - Zoom to the schematic for the selected net in the Compile Errors by Net column.
  • Recompile Project - Click to compile all schematic pages in the project.
  • Automatically recompile - Enable to automatically recompile while placing directives, to ensure the list remains accurate.
  • Automatically show selected - Click to zoom to the corresponding schematic net selected from the Compile Errors by Net column.

 

Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

Contact Us

Contact our corporate or local offices directly.

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
You are reporting an issue with the following selected text
and/or image within the active document: