Search In: Doc:Documentation: NEXUS Client
Altium DesignerAltium 365Altium MCAD CoDesignerAltium On-Prem Enterprise ServerAltium CircuitMakerAltium CircuitStudioCompany DashboardAltium Infrastructure Server
Ver: Version: 4
43.23.13.02.12.01.11.0
Close
Search Search on Documentation

Schematic Design Objects

Created: May 06, 2022 | Updated: May 06, 2022 | Applies to version: 4

This document is no longer available beyond version 4. Information can now be found using the following links:

Schematic Placement & Editing Techniques Working with Text Objects on a Schematic Creating Circuit Connectivity in Your Schematics Bundling Multiple Nets into Buses & Signal Harnesses Multi-sheet & Hierarchical Designs Specifying Design Requirements during Design Capture Creating a Schematic Symbol

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

This is a Structure page and, by design, contains no detailed information. It is simply used as a means to provide additional structure to the navigation tree, where grouping of pages is needed under an umbrella 'parent', but information is not needed on the parent page itself. For your convenience, links to its immediate child pages are provided below.
If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.