Configuring Schematic Image Object Properties in Altium NEXUS | 4 User Manual

Created: April 9, 2021 | Updated: November 3, 2021

This document is no longer available beyond version 4. Information can now be found here: Image Properties for version 5

Applies to altium-nexus version: 4

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer (with Altium Designer Enterprise Subscription) and a connected Altium 365 Workspace. Check out the FAQs page for more information.

Contents

Location (Properties panel only)
Properties

All Contents

Parent page: Image

Schematic Editor object properties are definable options that specify the visual style, content and behavior of the placed object. The property settings for each type of object are defined in two different ways:

Pre-placement settings – most Image object properties, or those that can logically be pre-defined, are available as editable default settings on the Schematic – Defaults page of the Preferences dialog (accessed from the button at the top-right of the design space). Select the object in the Primitive List to reveal its options on the right.
Post-placement settings – all Image object properties are available for editing in the Images dialog and the Properties panel when a placed Image/Graphic is selected in the design space.

If the Double Click Runs Interactive Properties option is disabled (default) on the Schematic – Graphical Editing page of the Preferences dialog, when the primitive is double-clicked or you right-click on a selected primitive then choose Properties, the dialog will open. When the Double Click Runs Interactive Properties option is enabled, the Properties panel will open.

While the options are the same in the dialog and the panel, the order and placement of the options may differ slightly.

In the below properties listing, options that are not available as default settings in the Preferences dialog are noted as "Properties panel only".

Location (Properties panel only)

(X/Y)
- X (first field) – the current X (horizontal) coordinate of the reference point of the object, relative to the current design space origin. Edit to change the X position of the object. The value can be entered in either metric or imperial; include the units when entering a value whose units are not the current default.
- Y (second field) – the current Y (vertical) coordinate of the reference point of the object, relative to the current origin. Edit to change the Y position of the object. The value can be entered in either metric or imperial; include the units when entering a value whose units are not the current default.

Properties

File Name (Properties panel only) – the name of the graphic file. Click to open a dialog in which you can search for and select an image.
Embedded – click to embed the graphic.
Width – the width of the graphic.
Height – the height of the graphic.
X:Y Ratio 1:1 – enable to make the X and Y ratio 1 to 1.
Border – enable the box to show a border. Use the drop-down to select the default from the available choices.

Contents

Location (Properties panel only)

Properties

Contact Us