Altium NEXUS Documentation

CopyComponent

Created: August 8, 2017 | Updated: July 28, 2018

Parent page: UnifiedComponent Commands

The following pre-packaged resource, derived from this base command, is available:


Applied Parameters: None

Summary

This command is used to copy the selected component definition(s) from the active Component Library document, to the clipboard.

Access

With the required component definition(s) selected, this command can be accessed from the Component Library Editor, when configured in Batch Editor mode, by:

  • Choosing the Edit » Copy Component command from the main menus.
  • Right-clicking over a component definition in the selection, and choosing the Copy Component command from the context menu.
  • Using the Shift+Ctrl+C keyboard shortcut.
If the Component Library Editor is currently in Single Component Editor mode, switch to the Batch Editor mode using the Tools » Switch to Batch Editor command.

Use

First, select the component definition(s) you wish to copy. After launching the command, the selection will be copied to the clipboard.

Tips

  1. Copy data into an external spreadsheet application, from where changes can be made as required using the cell editing power that only a spreadsheet editor can bring. Then paste the altered data back into the Component Library file – the most expedient way to build component definitions.
  2. To quickly duplicate a single component definition, use the Clone Component command.

 

Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

Contact Us

Contact our corporate or local offices directly.

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
You are reporting an issue with the following selected text
and/or image within the active document: