Query_Lang-PCBFunctions_AttributeChecks_CompCenterOfPadsXCompCenterOfPadsX_AD

現在、バージョン 1.0. をご覧頂いています。最新情報については、バージョン Query_Lang-PCBFunctions_AttributeChecks_CompCenterOfPadsX((CompCenterOfPadsX))_AD の 4 をご覧ください。

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

Parent page: PCB Query Functions - Attribute Checks

Summary

Returns component objects when the X-Coordinate of the centroid of their pads complies with the Query.

Syntax

CompCenterOfPadsX : Number

The entered coordinate is always in units of mils regardless of the measurement unit chosen for the board. (1 mil = 0.001 inch).

Example Usage

CompCenterOfPadsX = 1200
Returns all component objects when the X-Coordinate of the centroid of their pads is equal to 1200mil.

CompCenterOfPadsX >= 1500
Returns all component objects when the X-Coordinate of the centroid of their pads is greater than, or equal to, 1500mil.

CompCenterOfPadsX Between 1000 And 1400
Returns all component objects when the X-Coordinate of the centroid of their pads is greater than, or equal to, 1000mil, and less than, or equal to, 1400mil.

CompCenterOfPadsX < 800
Returns all objects except component objects when the X-Coordinate of the centroid of their pads is greater than, or equal to, 800mil.

Tip

  • The associated child objects of the complying component objects are also returned.
If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.