Query_Lang-PCBFunctions_Fields_PadXOffsetPadXOffset_AD

This document is no longer available beyond version 4. Information can now be found here: PadXOffset for version 5

Applies to NEXUS Client version: 4

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

Parent page: PCB Query Functions - Fields

Summary

Returns all pad objects whose Pad X Offset property complies with the Query.

Syntax

PadXOffset : Number

Number will follow the measurement units currently employed for the document – either Imperial (mil; 1mil = 0.001inch) or Metric (mm; 1mm = 0.001meter).

A specific option for the measurement unit can be specified – overriding the default units specified at the document level – through use of an additional measurement unit-based keyword:

  • AsMils(PadXOffset) : Number – to specify an offset in mil.
  • AsMM(PadXOffset) : Number – to specify an offset in mm.

Example Usage

PadXOffset = 2
Returns all pad objects that have an Pad X Offset property which is 2 current measurement units.

PadXOffset >= 0.2286
Returns all pad objects that have an Pad X Offset property which is greater than, or equal to, 0.2286 current measurement units.

AsMils(PadXOffset) Between 0.5 And 0.6
Returns all pad objects that have an Pad X Offset property which is greater than, or equal to, 0.5mil and less than, or equal to, 0.6mil.

AsMM(PadXOffset) < 0.2794
Returns all pad objects that have an Pad X Offset property which is less than 0.2794mm.

Tips

  1. The Pad X Offset property is only defined for pad objects.
  2. The Pad X Offset property corresponds to the Offset From Hole Center X field, when viewing the properties for a selected pad on the Properties panel.