Sch_Dlg-ChooseDocumentStructureViewChoose Destination Document_AD

現在、バージョン 3.2. をご覧頂いています。最新情報については、バージョン Sch_Dlg-ChooseDocumentStructureView((Choose Destination Document))_AD の 5 をご覧ください。

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

The Choose Destination Document dialog
The Choose Destination Document dialog

Summary

The Choose Destination Document dialog provides controls to specify the target schematic document on which to move the currently selected design objects when using the refactoring feature. Refactoring allows circuitry to be moved around between the project's source schematics and is particularly useful where a sheet is becoming overloaded, or the circuitry is better contained as a sub-sheet that is referenced by a sheet symbol on a sheet above it in the hierarchy.

Access

The dialog is accessed from the schematic editor by selecting the design objects constituting the circuitry to be moved then clicking Edit » Refactor » Move Selected Subcircuit to Different Sheet from the main menus.

Options/Controls

The dialog lists all candidate schematic documents for the project that can legitimately be used as the target sheet for the move. Click on an entry to select the required document.

The active schematic document on which the selected circuitry currently resides is grayed out. As it is the source document, it cannot also be a valid target document for the move and is therefore unavailable.
If the selected sub-circuitry is to reside on a fresh schematic sheet (i.e., a blank canvas), ensure that the schematic is first created and saved so that it will appear in the dialog.
If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.