Search In: Doc:Documentation:
Altium DesignerAltium 365Altium MCAD CoDesignerAltium CircuitMakerCompany DashboardAltium On-Prem Enterprise ServerAltium Infrastructure Server
Close
Search Search on Documentation
Documentation

다른 설치 프로그램

Created: May 09, 2019 | Updated: December 11, 2024
 

This page presents a convenient listing of previously available Altium Design solutions, with links to installers, service packs, output generators, libraries, and the like.

Altium Concord Pro

Installation of Altium Concord Pro is performed using the Altium Concord Pro Setup wizard. Download and run Altium Concord Pro <version>.exe. For more information, refer to the relevant version of the Installation, Licensing & Management page.

Installer for Last Released Version: Altium Concord Pro 5.0.2 (exe, 2.2 GB)
Technical Documentation Link: https://www.altium.com/documentation/altium-concord-pro

Altium NEXUS

The following sections list the releases of both the Client and Server parts of the overall NEXUS solution.

Altium NEXUS Client

Installation of Altium NEXUS Client is performed using the Altium NEXUS Installer wizard. Download and run AltiumNexusSetup<Version>.exe. For more information, refer to the relevant version of the Installation, Licensing & Management page.

Installer for Last Released Version: Altium NEXUS Client 5.8.2 - Online Installer (exe, 26.01 MB), Offline Installer (zip, 2.76 GB)
Technical Documentation Link: https://www.altium.com/documentation/altium-nexus

Altium NEXUS Server

Installation of Altium NEXUS Server is performed using the Altium NEXUS Server Setup wizard. Download and run Altium NEXUS Server <VersionNumber>.exe. For more information, refer to the relevant version of the Installation, Licensing & Management page.

Installer for Last Released Version: Altium NEXUS Server 5.0.2 (exe, 2.2 GB)
Technical Documentation Link: https://www.altium.com/documentation/altium-nexus-server

Vault Technologies

  • Altium Vault 3.0.14 (178 MB) - Installing the Altium Vault is performed using the Altium Vault Installer. Download and run Altium_Vault_3_0_14_730.exe. Specify the destination folders for the installation, and the data, and specify the port number for the web server. For more information, see Installation, Licensing & Management.
  • Altium Vault 2.0 (145 MB) - Installing the Altium Vault is performed using the Altium Vault Installer. Download and Run Altium Vault 2.0.5.34308.exe. Specify the destination folders for the installation, and the data, and specify the port number for the web server.
  • Altium Vault Server 1.2 (137 MB) - Installing the Altium Vault Server is performed using the Altium Vault Server Installer. Download and Run Altium Vault Server 1.2.30757.exe. Specify the destination folders for the installation, and the data, and specify the port number for the web server.
  • Personal Vault 1.2 (65.5 MB) - Installing the Personal Vault is performed using the Personal Vault Installer. Download and Run Altium Personal Vault 1.2.30759.exe. Specify the destination folders for the installation and for the data.
Personal Vault 1.2 introduced the ability to acquire managed content from other vaults. At the same time, the number of possible concurrent connections was reduced from 3 to a single connection. If more than a single (concurrent) connection is required, consider upgrading to Altium Vault 2.0 (or later), or retaining Personal Vault 1.1.
  • Team Configuration Center 1.0 (TC2) (99.7 MB) - Installing the Team Configuration Center is performed using the TC2 Installer. Download and Run TC2 1.0.30758.exe. Where the installer detects an installed Altium Vault Server, TC2 will be set up to use it as its default repository. TC2 requires the installation of the latest Private License Server v14.0.
  • Vault Migration Tool (1.9 MB Zip)- To successfully migrate between vaults, you must be using the latest version of the Vault Migration Tool (version 1.3.0.7), Altium Personal Vault (build 1.2.30759), and Altium Vault (build 2.0.33788 or later). Ensure you have upgraded your Altium Personal Vault (if not already) from v1.1 to v1.2.

Altium Designer

To take advantage of the latest capabilities in Altium Designer, it is advised to upgrade to the latest version. Many great new features and technologies have been developed and added along the way since these previous versions of the software, as well as a myriad of enhancements to existing features, bug fixes and implementation of ideas sourced from members of the AltiumLive community. And when you do upgrade to the latest release of Altium Designer, it's highly recommended to purchase Altium Designer Software Subscription for each license too. Being on subscription opens the door to a number of additional attractions, not least the ability to stay current with the software – being able to install new updates and access features and functionality as soon as they leave development.

  • Altium Designer 6 full installation
  • Altium Designer 2004 full installation

Libraries

Examples & Reference Designs

The below downloads are deemed to be 'frozen'. These ZIPs were built at the time of the launch of Altium Designer 10.

Output Generators

All Altium Designer releases from Summer 08 onwards include all available output generators. For prior versions, the generators available for download are listed in the following collapsible sections:

Legacy Documentation

The following PDFs contain information for areas of functionality that were available in earlier versions of the software. Each is a 'frozen' snapshot that will not be updated. Rather it is made available here, 'as is', for those that may have earlier versions of the software, where such features were available.

In terms of legacy connected hardware, the following are the set of attachments that were previously available. Note that Altium no longer manufactures, nor sells, any of the NanoBoard, Peripheral Board, Daughter Board, or other connected hardware, detailed in any of these legacy documents.

A complete set of 'frozen' PDF documents from 2008, a subset of which were still available with Altium Designer 13/12/10, can be downloaded using the following link. Again, this documentation is provided 'as is' and will not be updated.

Miscellaneous

  • Altium Designer Uninstaller (1.4 MB) - Uninstalling Altium Designer is performed using the Altium Uninstaller. Select the installation you wish to uninstall, control the degree to which you want to uninstall , and manage and clear your download cache. This uninstaller can be used for Altium Designer 13, 12 and 10.

  • Altium Instrument Dashboard (31.7 MB) - A stand-alone, custom instrument viewer that lets you remotely control and test designs using wireless or Internet technology, without having Altium Designer installed. A free application that can be installed on any PC.

  • Altium Designer Viewer (131 MB) - Enhances the data exchange capabilities of Altium Designer by giving non-designers secure access to essential design data, plus the ability to generate reports and printouts. A free application that can be installed on any PC.

  • Private License Server (14.0.0.34) - Administer license usage on your local network. By setting up a Private License Server, your central server machine can control access to floating licenses by multiple computers on the network. For more information on using this software, see Legacy - Using a Private Server License.

Altium DXP (2002 Release)

Protel 99 SE

  • Protel 99 SE Service Pack 6  (EXE 12,077 KB) - Cumulative SP6 download for Protel 99 SE. Contains updates and enhancements in binary patch form to update your current installation. Compatible with both the licensed and trial versions of Protel 99 SE, you do not need to remove any previously released service packs.
  • Protel Service Pack 6 Packs - Various packages included in Service Pack 6 for Protel 99SE:
    • P-CAD Translation Pack (EXE 1,619 KB)Included in Service Pack 6 for Protel 99 SE - This pack provides seamless migration between Protel 99 SE and the P-CAD 2000 design environment. This translator supports ACCEL V15 ASCII and P-CAD 2000 ASCII files.View Readme
    • PADS Importer (EXE 1,420 KB) Included in Service Pack 6 for Protel 99 SE Allows you to import a variety of PADS® PCB ASCII files into Protel 99 SE's PCB Editor.View Readme
    • Hole Size Editor (EXE 193 KB) Version 5.0 - Included in Service Pack 6 for Protel 99 SE - Displays a list of all the hole sizes used on the PCB, allowing you to change any hole size, automatically updating all the affected pads and vias. Requires Protel 99 SE.
  • AutoRFQ (EXE 2.1 MB) - AutoRFQ is a web-based system that allows you to request a quotation for the fabrication or assembly of your board directly from Protel 99 SE's PCB editor.
  • Protel 99 SE Handbook (PDF 5.13 MB)

Protel 99

Protel 98

Note: This file is the same file that was released with Protel 98 Service Pack 1. Compatible with Protel 98 service packs 1, 2, and 3.

Protel Version 3

Protel Version 3 SP 1 (EXE 2,526 KB) - Contains updates and enhancements in binary patch form to update your current installation.

P-CAD

All Altium freeware products are provided subject to the conditions set out in the Altium End-user License Agreement.

Freeware Downloads

  • Autotrax (ZIP 821 KB) - DOS Freeware version 1.61 - Complete PCB layout package with output support for printers, pen plotters and Gerber. Download and run the file in the root directory of your hard drive to extract the install program. The install program must be run from the root directory.
Please Note: We do not provide technical support for this Autotrax Freeware version.
  • EasyTrax (ZIP 485 KB) - DOS Freeware version 2.06 - Complete PCB layout package with output support for printers, pen plotters and Gerber. System requirements: PC-compatible; DOS 2.0 or later; 640K RAM; 2Mb of hard disk space.
Please Note: We do not provide technical support for this EasyTrax Freeware version.

 

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.
콘텐츠