Altium NEXUS Documentation

ObjectVisibility

Created: 09.06.2022 | Updated: 09.06.2022

Parent page: MultiBoardAssembly Commands

The following pre-packaged resource, derived from this base command, is available:


Applied Parameters: Scope=TreeViewSelected

Summary

This command is used to toggle the visibility of the selected part(s) - PCBs, Components, and 3D STEP models (enclosure/case) - in the active Multi-board Assembly document (*.MbaDoc).

For a high-level look at multi-board design within Altium NEXUS, see Designing Systems with Multiple Boards.

Access

This command can be accessed from the Multi-board Assembly Editor in the following way:

  • With the required part(s) selected in the Multiboard Assembly panel, right-click and choose the Visible command from the context menu.
The command is not available directly in the workspace for components.

Use

Ensure that the part(s) is selected in the the Multiboard Assembly panel. After launching the command, the visibility of the selected part(s) will be toggled off and on in the editor.


Applied Parameters: Scope=SceneSelected

Summary

This command is used to toggle the visibility of the selected part(s) - PCBs, Components, and 3D STEP models (enclosure/case) - in the active Multi-board Assembly document (*.MbaDoc).

For a high-level look at multi-board design within Altium NEXUS, see Designing Systems with Multiple Boards.

Access

This command can be accessed from the Multi-board Assembly Editor in the following way:

  • With the required part(s) selected in the workspace, right-click and choose the Visible command from the context menu.
Use

Ensure that the part(s) is selected in the workspace. After launching the command, the visibility of the selected part(s) will be toggled off and on in the editor.

 

Обнаружили проблему в этом документе? Выделите область и нажмите Ctrl+Enter, чтобы оповестить нас.

Связаться с нами

Связаться с нашими Представительствами напрямую

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
Вы сообщаете о проблеме, связанной со следующим выделенным текстом
и/или изображением в активном документе: