PCB_Dlg-DefinePrimitivesSelectableWithShiftShift Click To Select_AD

Вы просматриваете версию 2.0. Для самой новой информации, перейдите на страницу PCB_Dlg-DefinePrimitivesSelectableWithShift((Shift Click To Select))_AD для версии 5

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

The Shift Click To Select dialog
The Shift Click To Select dialog

Summary

The Shift Click To Select dialog is used to define which primitives use Shift+Click to select.

Access

The dialog is accessed from the PCB Editor - General page of the Preferences dialog by enabling the Shift Click To Select option and then click the Primitives button.

Options/Controls

Primitives can be individually selected to enable or disable the option to use Shift+Click to select. The following controls are also available to enable or disable Shift+Click to select for all primitives at once:

  • All On - Click to select all primitives in the grid area and enable the use of Shift+Click to select for each.
  • All Off - Click to deselect all primitives in the grid area and disable the use of Shift+Click to select for each.

Click OK to save changes and exit the dialog, or Cancel to exit the dialog without saving changes.

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.